Daisy Powerline 856 Modification?

**Gearheadtom** · 03-20-2009, 05:44 PM

I have a Daisy Powerline 856 pellet gun. I know this gun shoots at a higher feet per second if you buy it in the US. Mine currently shoots at 490 FPS. I have heard that I can modify it to shoot with the same power as the US version does. Does anybody know anything about this?

**Gearheadtom** · 03-21-2009, 04:44 PM

I did some more looking and found that the same model as mine shoots a 675 FPS in the US. There must be a way to make mine do that. Nobody knows?

**outtaline** · 03-21-2009, 06:29 PM

its a real pain to modify parts are non existant and have to be made you are better off buying the gammo hunter 1000 plus ft per second killed a stray nasty mutt with one shot to the head good for 40 plus yards

**Gearheadtom** · 03-21-2009, 06:42 PM

I don't know if I can get something like that here in Canada. I know the law for pellet guns is that they cannot be 500 FPS or greater.

**outtaline** · 03-21-2009, 06:48 PM

ya'll sure got some dumb laws up there

**AutoXer** · 03-22-2009, 08:41 PM

Originally Posted by outtaline

its a real pain to modify parts are non existant and have to be made you are better off buying the gammo hunter 1000 plus ft per second killed a stray nasty mutt with one shot to the head good for 40 plus yards

Yeah thats what i'm talking about ....... should take care of a pesky ground hog

**Gearheadtom** · 03-23-2009, 03:16 PM

I was thinking that if I could get the part in mine that makes it shoot at a slower FPS from a US model, I would then have the same power as a US model.

**The Goat** · 03-23-2009, 03:25 PM

I don't have a way of looking at the moment, but if it's spring powered... buy an extra spring and stretch it.

if it is gas powered... idk.

I know a Benjamin .177 with 20 pumps will go through 3/4 inch plywood at 20 pumps.

damages seals over time though.

**edog** · 03-23-2009, 04:00 PM

Originally Posted by AutoXer

Yeah thats what i'm talking about ....... should take care of a pesky ground hog

This will take care of him.

Thread: Daisy Powerline 856 Modification?

Thread Tools

Daisy Powerline 856 Modification?

nope

man