Power User
Teaching quads a lesson
Got this at Tractor supply. Evapo rust........ no fumes, easy on the hands an man it worked awesome on a 70 carb in a matter of hours!! 20.00 for the gallon but I will reuse for sure. Got some in the 110 project tank, will see how it works as well. Give it a try....
Power User
4 Wheels? Huh?
Ive used it, there is a thread on hear about it, works awsome, I did the inside of my 200e tank with it came out like new.
MY FEEDBACK THREAD- http://www.3wheelerworld.com/showthr...ight=aldochina
Power User
Teaching quads a lesson
ya man, that stuff kicks arsss... I know what I will use from now on.....
Power User
Roostin Away
that is what its called evapo rust?? at tractor supply eh?
2- 85 Tri-Z's black and Yellow
2- 85 250SX's
1- 85 200X
3-ATC 70's
2- 85 tri-zinger's who needs some parts
Power User
Roostin Away
So,, seing that this stuff is so good at removing rust,, do you think if I put it on my current frame, it will make it vanish???
My rides, 1985 ATC 350X, With legit Lamborghini Countach paint,2003 Harley Davidson FXDL Dyna Low Rider,customised the way I like it!
1997 GMC Sierra is gone, primary mode of transportation, 2008 Toyota Yaris!
Check out my build thread of my 350X
http://www.3wheelerworld.com/showthread.php?95389-Tank-s-1985-350X-build-is-FINALLY-all-done!-)
Screw giving away the Harley, It's payed for!!
Got The Holeshot
Arm chair racerJust too addicted
I saw that stuff at Canadian Tire, but I didn't know how well it would work. I'll try it on my 200m tank to get the rust out, I'm currently running on rust color gas.
Rides:
1985 250sx
1982 ATC185s
1984 200es
Always Hoping For a Maritime Trikefest- http://www.3wheelerworld.com/showthr...s-where-you-at
"Wear Limits Are Just A Suggestion"
Power User
Teaching quads a lesson
Don't know if it would work on frame....needs submersed. You would need 438 gallons to cover a 350x lol lol
First Time Rider
Arm chair racerNew to the board
i have used it and i just finished dropping a bunch of rusty bolts in a plastic cup with this stuff and works great, they come out looking like new (overnight) . i did all the bolts on my 85 R with about half of the small bottle.. once it stops working it will start forming like a white milky looking substance on the surface of the liquid , then you know its time to replace it with some fresh juice..
because 3 wheels are better than 4
New to the board
Arm chair racerNew to the board
i have an old cylinder that has some rust inside it. would it work to use on that or is it too strong? is it harmful to bearings?
Last edited by 86tecater; 03-07-2009 at 06:32 PM.
Power User
Teaching quads a lesson
I used it on carb and it did no damage on rubber gasket, I left on on to see whay would happen? It is pretty safe stuff....... would not be afraid to try on cylinder or head??
At The Back Of The Pack
Arm chair racerFirst time rider
i just bought some and dropped these in there.
i'll show you the results in a few hours. those are muffler guards btw.
3 wheelers:
'85 ATC 110 (its my first restoration!!)
Saving up for a 250r later this year!
Just Too Addicted
Arm chair racerJust too addicted
At The Back Of The Pack
Arm chair racerFirst time rider
Here they are!!!!
After two days of soaking (due the fact that i had to flip them over to get all the rust) look!! they're close to shiny clean!!!
Look what it did to the Evapo Rust too. Haha! Not very reusable
3 wheelers:
'85 ATC 110 (its my first restoration!!)
Saving up for a 250r later this year!
Power User
Got the holeshot
im going to get some in the morning.got a few projects in mind.
1985 ATC 250R.Team Red Trike
Power User
The day begins with 3WW
If you clean the parts first, the solution will last longer. Also, even though it looks dirty, the solution will still clean, it just takes longer (to a certain point).
Reply With Quote
