Yamaha 3 wheeler owners Club

**TheCamaroGuy** · 02-19-2009, 11:02 PM

I guess you can add my name to the list.
Trimoto 125 and 175

**Yamada** · 03-16-2009, 12:28 PM

BUMP!
Anyone else want to add their 3 wheeler?

**225DX DUDE** · 03-16-2009, 04:21 PM

You can add me.

1984 Yamaha 225DX & 1986 Yamaha 225DRS

**vbb71zoso** · 03-16-2009, 08:44 PM

Any of you guys know where I could get my hands on a recoil starter for a Tri moto 175cc? It's that last thing I need and it is killing me not to find one! Any suggestions would be great......Vince

**zppeacock** · 03-16-2009, 10:38 PM

1983 Ytm-200e

**vbb71zoso** · 03-18-2009, 05:33 PM

I picked this up last weekend in my home town of Brunswick Ohio. The guy had it in there for $100 and I did not even try to talk him down. It is rough, but I started it on one pull with a rope. (Starter is on the way with help from Old-Yellow) Anyways.....The guy ran it with mixed oil and I would like to do the same. Any suggestions on the mix ratio? Originally I was going to buy it for the new tires that are on it, but I like it too much to part it out. If anyone has suggestions on what else to do as far as the oil pump and carburetor to run mixed fuel, I would love to know.

Thanks.....Vince

btw.....My boy Logan isn't really a punk....I told him to look "cool"

**Yamada** · 03-18-2009, 05:38 PM

Look better then my 225 when I picked it up.

**jakesdad36** · 03-18-2009, 08:11 PM

You can add me in
1983 YTM 200K
1985 TRI-Z (just got it)

**Vealmonkey** · 03-18-2009, 08:18 PM

Vbb, if you do a "search" you should be able to find a thread on what to change for the running the premix in the gasoline. It's basically unhook the premix line from the tank to the pump and the line from the pump to the carb and block off the carb premix barb with one of those vaccuum hose block off caps and then add the premix to your gas and you should be good to go. Let the oil pump run a while without blocking it off to make sure all the premix is out of the oil pump. You don't have to do anything to the pump if you don't want to, just leave it in place. You mix your premix according to the manufacturers suggestion. Some premix oils have suggestions on the back of the bottle. Start with their recommendations. Have fun.

**KingGlamis** · 03-19-2009, 12:40 PM

Newbie here, but not new to 3 wheelers. Tomorrow we pick up the Tri-Zinger pictured here. It's for the kids but you know I'll be riding it around camp. First order of business will be to recover the seat. LOL

**Mackee** · 03-20-2009, 08:13 AM

I have ridden all over the US on 4 wheelers and just recently purchased my first 3 wheeler, a 1985 YTM 225DR. I know I am going to be hooked when I get her ready and take her for a spin. Good to be on here!

Mike

**82cutty** · 03-20-2009, 01:57 PM

My Tri-Moto I just bought a few weeks ago . Cleaned up the plastic... it was really bad . I sanded for hours . Also put some new tires on the back and have a new front tire on the way .
Yesturday I swapped out the ancient front headlight and installed a 9006 bulb .

The little guy runs pretty strong for a 125 but I think i'm going to swap a 175 in it for alittle more

Some pictures :

[IMG]

[/IMG]

[IMG]

[/IMG]

I'm doing the seat cover now that's why the seats off . Dark gray vinyl for the seat

**Yamada** · 03-20-2009, 05:05 PM

I think I never saw a 125 with this model of fork. Looks likes ytm-200 fork.

**82cutty** · 03-20-2009, 09:34 PM

Originally Posted by Yamada

I think I never saw a 125 with this model of fork. Looks likes ytm-200 fork.

It's from a 225 dx

**vbb71zoso** · 03-20-2009, 09:54 PM

What part of the engine is the small black cover with the two tubes coming out of it? I have my first 2 stroke and I am not familiar with it. I do not have a manual yet. I am still looking to download one with no luck so far. Anyways....I am cleaning this up and wanted to know what this is. Thanks guys!

Thread: Yamaha 3 wheeler owners Club

Thread Tools

I officially throw my hat in too

175 engine question???