crossover parts??? 200x-350X

[vegas250rr]

Just wondering which parts these share, I dont have a 350, or I would have something to add...

First off I would like to know if the grab bar mounts are the same... all other items are just for the benifit of the thread... SPEAK UP ALL!

[NINJA]

Some can be adapted to fit but it depends on what generation 200X you are referring to. For example, the air filter swaps between the 350X and the second gen. 200X. The rear shock from the 350X can be fitted to the first gen. 200X with modification to the old 350X shock linkage. The 350X front tripples and forks along with the front brakes can be bolted on to both gens. of the 200X. The 350X front hub and wheel are a direct bolt on to both gens. The rear wheels are the same bolt pattern, however the rear hubs are not interchangeable. I've been told the 350X seat can be retrofitted to go on to the 2nd gen. 200X, though I haven't tried this.

[deathman53]

Also 2nd gen. 200x foot pegs(not the plates) can go on a 350x, also the same as 86 and 87 trx250r's. 83/84 250r axles fit on 2nd gen. 200x w/ use of the correct hardware, I think the rear brake is the same as a 350x, I know the rear rotor is. I know there is more, a 2nd gen. 200x is kinda like a cross between an 83/84 250r and 85/86 350x, there has to be more parts that interchange between the 3 models.

[Ride_Red_Man]

I would be curious if anyone has anything to add to this thread as it seems to have died a few years ago. Any updates about any 350x parts that will cross to a 2nd gen 200x?