At The Back Of The Pack
Arm chair racerAt the back of the pack
I was wondering where you all mounted your stickers... I am dealing with this for the first time, but I dont want them on the plastics incase I take a "ride" and have to replace the skins... anyone got some creative mounts that are not! attatched to the plastics?
85 350X, 85 250R, 99 TRX 90, 05 Predator 90, 05 TRX 400ex, 2019 RZR4 XP100
FEEDBACK for Vegas250rr
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
I thought and thought about this on mine, and I came up with two suggestions:
Wrapped around the fork in between the top and bottom tripple tree. But I decided against it because I seem to change fork seals often.
Wrapped around the steering neck of the frame, where the original Vin # is. But I decided against that because of all the cables that would be rubbing on it.
I ended up just putting mine on the headlight bucket. Its $10 to replace it if I need to, so I just went ahead and did that.
At The Back Of The Pack
Arm chair racerAt the back of the pack
I forgot to mention that Ca. stickers have to be on the LR corner visible to the outside to be legal.
85 350X, 85 250R, 99 TRX 90, 05 Predator 90, 05 TRX 400ex, 2019 RZR4 XP100
FEEDBACK for Vegas250rr
Just Too Addicted
Arm chair racerJust too addicted
how about making a couples pieces of plastic the size of the stickweras and then rivet them on to the plastic
85 honda 350x
78 honda atc 70
84 yamaha 225dx
03 honda cr 125
57 chevy bel air
79 shortbed chevy 4 in lift and 35"s
At The Back Of The Pack
Arm chair racerAt the back of the pack
thought about that , but decided against it because they are factory fenders. (stitched, but still) no sense in putting even more holes in em
85 350X, 85 250R, 99 TRX 90, 05 Predator 90, 05 TRX 400ex, 2019 RZR4 XP100
FEEDBACK for Vegas250rr
Power User
Roostin Away
Around here we just put our plate under the seat on the air box. My bike is not regastered so I don't have to worry about this. And if the cops ask, you have replaced all kinds of plates and they get expensive.
The Green No More Red EVER EVER EVER AGAIN!!!!!!!
1985 KXT 250 Tecate
1984 KXT 250 Tecate Parts machine
1985 KXT 250 Tecate My vintage racer
1983 KX 250
Proud member of
3wheelerworld.com
3wheeler.org
Planettrike.com
Airfoolers.com
http://www.3wheelerworldforums.com/s...ad.php?t=80907
First Time Rider
Arm chair racerNew to the board
Take a piece of PVC pipe and cut out about 1/3 of it. It snaps on between the tripple clamps. You can take it off to work on the forks when needed. Cheap and easy. I've been able to get away with this for years. It's actually the law for the motorcycles but, rangers have never hassled me for it.
1985 ATC 250R
1986 ATC 200X
1986 TRX 250R
Reply With Quote