Selvys Performance anyone know about them???

[mike from long island]

on my 85 250r it has a silencer from them. after taking the motor out 200xman notice the jug as the selvys stamped on it. anyone know anything about them?

[Billy Golightly]

Yes...they made the 200cc sleeve down kits to run 250R's in the 200cc class. Get a mic and check the bore on that thing, you might be running a 200cc kit and not even know it!

[mike from long island]

heres the jug

[mike from long island]

also how do you tell an 85 motor from an 86? 200xman thinks my 85 frame has an 86 motor because the bottom end is not black its that gray color?? any help is appreciated thanks mike

[bigredhead]

http://www.3wheelerworldforums.com/a...p/t-17281.html

this has mention of it... found on google.

[BigGreenMachine]

85 motor was black, 86 silver. First time I've seen a Selvys silencer on a non magazine R. Definetly crack her open and check the bore size. Maybe you just have a cylinder that was worked over by Selvys. Really interesting.

[350x'inNY]

also how do you tell an 85 motor from an 86? 200xman thinks my 85 frame has an 86 motor because the bottom end is not black its that gray color?? any help is appreciated thanks mike

By the serial number..... anyone can paint or strip a motor.

[86waterpumper]

take that intake boot off, and let's see if she has any porting

[88 Turbo Coupe]

The transmission gears are different on a 85 compared to a 86.

[Lots_Of_Nothing]

Stop guessing, dang.

85 was black, 86 was gunmetal.

Selvys did a heck of alot more then the 200cc conversion, and their 200cc motors werent done with just a sleeve, they had a whole mess of mods throughout the motor (crank, tranny, etc). I remember reading the 3wheeling mag that showed a step by step procedure (with lots of pictures) of what went into selvys 200cc motors. Infact, waterpumper has that magazine now If I remember correctly.

I've seen the silencers, and some cylinders on ebay before. Most likely the R just had a owner that was a selvys fan and used all their aftermarket goodies. But you never know till you crack that thing open .

[250rAL]

They had a mod where they cut half of the exhaust spigot out, lowered the floor of the exhaust, then welded it back together. I don't remember what it accomplished but it was supposed to be potent.

[Mike Fort Laud]

Selvy did my 200R. Anybody could sleeve a 250 to a 200. Selvy kept the 250 bore, but cut the cylinder shorter, and they use a shorter stroke crank. A big bore short stroke motor will rev quicker and be better on the track. I would like to find a Selvy silencer like that. That is cool.............Mike

[RideRed250R]

sweet man nice find

[AZ250R]

I would like to find a Selvy silencer like that. That is cool.............Mike

YEP'R ME TOO! Short silencers ROCK IMO.

[350x'inNY]

Mike from Long Island..... heard that thing is a scary ride and puts your Tri-Z and every other trike you've had to shame. Got an update? ...or you trying to go 'hush-hush' and surprise us at the drags at TF05?