wheels bolt pattern

[82-8250R]

what is the bolt pattern on my 82-250R 4X110 or 4X113?

[Mobular]

it's 4/130

[ScottZJ]

This chart should answer your question.

[4cylinders]

hey, 84 200x has 8m/m studs. thats why I didn't use a 350 x front wheel on the monster with the 200x front end.

[clong]

What do the numbers mean> For example what is
8x8
4+4
4/110
10MM

Say for question - would the rear rims off a 1983 200X fit on a 1985 250R?

[plkmonster2]

8x8 is the wheel height by width. 4+4 is the offset. That is an equal offset, the hub is in the middle of the rim. 4/110 is the Wheel pattern. 4 Studs, and the opposite studs are 110mm apart, from the centers. 10mm simply means the size of the stud.

[corndawg]

i know this has nothing to do with your question but ones off of a YT125 will fit a YT175

[plkmonster2]

Forgot to add, yes the wheels will interchange. But the R rims are 1 inch taller, and are 1 inch wider ( I think) than the x rims.

[Mobular]

8x8 is the wheel height by width. 4+4 is the offset. That is an equal offset, the hub is in the middle of the rim. 4/110 is the Wheel pattern. 4 Studs, and the opposite studs are 110mm apart, from the centers. 10mm simply means the size of the stud.

Just a point of clarification. The height measurement of a wheel is taken inside the lip, where the tire bead seats, NOT the outermost edges of the wheel.