I found this and though maybe someone could used the engine and running gear on a YTM. I don't know if it all swaps or not. May be a better deal than shopping for parts on Ebay if someone has a YTM that can use the parts. The frame is bent.

https://fortcollins.craigslist.org/m...836325270.html

1985 Yamaha YFM 200 PROJECT - $600 (Wheat Ridge (Denver Metro))


These did not come with titles so there is no title. I can provide a bill of sale.

This was last run in 2023. I did start it this past weekend using ether. It did not stay idle or stay running but it did start. THE FRAME IS BENT. Only 3 tires touch the ground at a time. The back rack was bent beyond repair so it was removed and tossed. The throttle housing is broke so it will need to be replaced. The throttle cable is there and usable. The tires are in good shape. The seat is not ripped. The plastics are in good shape. I was going to pull the motor and try to bend the frame back in to shape and call it good but it isn't going to happen. I found a used frame on eBay for a decent price but I don't want to deal with it. This was a great little machine and will be again with some work.

THIS ATV CANNOT BE RIDDEN IN ITS CURRENT CONDITION. It hasn't been started since 2023. I'm not going to get to it and I don't want to leave it sitting. It has a lot of good parts.

Hopefully you can get an idea of its condition from these pics. It is tucked back in the garage at the moment but I plan on pulling it out soon for more pictures.

If you've read this far and are still interested, I will sell it for $500. I won't go any lower. It is worth at least double that when parted out - I'd just rather sell whole if possible.

Please contact with any questions.