First Time Rider
Arm chair racerNew to the board
I got a 85 atc200s in unknown condition and after freeing up the throttle cable it started and ran pretty good I got the tires to hold a little air and took off it shifts through each gear find except no 4th gear no noises or grinding. How hard is it to split the cases and would the tranny parts be the same from a 84 200s.
Power User
The day begins with 3WW
84 has a down shift transmission and I believe the 85 is an up shift transmission .
You can cross reference the part numbers on partzilla to see what’s compatible .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
First Time Rider
Arm chair racerNew to the board
Thanks I'll check that out. I drained the oil and sprayed some pb blaster in and I'm hoping something just stuck.��
Reply With Quote