New to the board
Arm chair racerNew to the board
The starter gear has a broken tooth. Old, very clapped '84 200x I am going to restore but cannot find this gear anywhere. Anybody ever run a gear with a missing tooth? I'll do that as a last resort.
This is the gear that goes onto the clutch side of the main shaft. It is #16 on the partzilla parts fiche.
I can't find this for the 200x anywhere. Are there any other machines that used this same gear, maybe?
Sent from my SM-S908U using Tapatalk
Power User
The day begins with 3WW
1983 is a different tooth count but 1984 and 85 are compatible , in 1985 the gears were made a little thicker but fit just the same , I guess Honda realized their was an issue . Also a few years of the xr200 were also compatible , 1990-2002 I believe .
Here is a set , little pricey but an upgrade if yours is an 84 model .
https://www.ebay.com/itm/20431707674...Bk9SR_SWmr34YQ
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
New to the board
Arm chair racerNew to the board
[QUOTE=shortline10;1532126]1983 is a different tooth count but 1984 and 85 are compatible , in 1985 the gears were made a little thicker but fit just the same , I guess Honda realized their was an issue . Also a few years of the xr200 were also compatible , 1990-2002 I believe .
Awesome! Thanks for the info. And the link.
Sent from my SM-S908U using Tapatalk
Reply With Quote