BW350R RD350 Fat Cat project
Well I got working on an old project again it has been 4 years in the making if that tells you how back burner I’m talkin.
I took a bw 200 swing arm, shoehorned it in to a 75 rd350 frame put new bearings, new jack shaft and all, put the bw 200 front end on and replaced the forks with 200x for front disc. Recently I made a 2 into 1 pipe and and installed an upswept expansion chamber.
After finding my clutch had stuck for sitting so long I decided to get a banshee set, I also got some bowl gaskets to stop the 42 yr old dried out gasket leak.
what a dam beast. Now to get a tank and modify it to fit the forks. Mine was so dented I just bashed in the rest to ride. But it’s a leaker.
10 Buy it
20 Beat it
30 Break it <----- Sometimes this is the end of the routine
40 Fix it
50 Sell it
60 Goto 10
Current
1985 @TC 350x, 1986 @TC 600x <---need to make a 250r into a 500r next.
Past
81 KLT 200 ,82 ATC 185S Restored, 84 Tri Moto 125,
84 200es Big Red, 85 250es Big Red
85 1/2 TRI-Z 250 Fully Restored 2nd place in competition @ Metrolina bike show March 2011
85 350x, 86 350x
86 250r Restored ,87 250es Big Red, 87 200x Restored
Reply With Quote