200x class at the NEETD TT Nationals 2017.

[fieldy]

Page 4 , post 58 in this thread has the NEEDT series rules.

[86T3]

Fieldy, the debore pistons are rare but not worth a lot because there is next to no market for them. Klemm sells debore sleeves to put in the stock cylinder. I think there are 4 size debore pistons for over bores but I'm not sure. I'm putting a kdx200 into a tecate frame so I don't have to deal with hard to find parts. A carpool thread would be good idea. I'm going to push racing more this year than I have in the past, I'll try to start threads for all of the east coast races. Keep your eyes open for them next summer and post where you are, maybe we can hook some people up.

Ritz cracker, you want to make sure your trike is in good condition before showing up. Front and rear brakes, tether kill switch, non broken clutch and front break levers (the little balls on the ends of stockers are best), and cotter pins in your axles are all checked at Tech. TT races have a maximum width of 50"z and you need to have flat track style rear tires. If you have any other specific questions don't hesitate to ask

[Mickey Dunlap]

I have never raced before but I'm building a 81 250r and also have a 85 200x. Is there any literature I should read. Like rules or stuff like that. Lol I know it's probably a stupid question I just like to be prepared. Also I live in oneonta ny and plain on trying to make it to all the races I can.

Bring that 200x! You will have a blast.

[Mickey Dunlap]

Here comes another one, at this rate there is going to be a good turn out in MI. too.

[atc300r]

I have never raced before but I'm building a 81 250r and also have a 85 200x. Is there any literature I should read. Like rules or stuff like that. Lol I know it's probably a stupid question I just like to be prepared. Also I live in oneonta ny and plain on trying to make it to all the races I can.

81 250rs are fun to race. I raced mine in several forms of racing. I raced it at Paradise in Geneva on TT , Make sure you have good bearings all around .Wide and low is best for TT flat track.Alot of us use lawnmower tires on the back 18x10x8 or 9.with stockish front tire. New chain and sprockets ,fork seals,tether switch good brakes . You will need boots aleast 8 inches high ,gloves ,long sleeve shirt, helmet and goggles at the minimum. Paradise is only 2 and half hours from you. pic of my 81 250r DG racer.

[86T3]

Did you get that head off Buffalo craigslist 3ish years ago? There was a parts machine with a gold head, I called on it but he was holding it for someone from Rochester. Always wondered who got it

[atc300r]

Did you get that head off Buffalo craigslist 3ish years ago? There was a parts machine with a gold head, I called on it but he was holding it for someone from Rochester. Always wondered who got it

No. I got it from a member on air-foolers.com about 5 years ago.Are you looking for 1.

[86T3]

No, it was a good deal. 250 for the trike, had a nice looking tank and the gold head. I think the motor was apart. It was a while ago, just something I remembered for some reason. Air foolers are cool, but I have too much stuff already

[Mickey Dunlap]

First time at a national in 30 some years the 200xes had their own class! The lites class had 8 riders, 3 were 200xes, the 200x had 6 first time out. Now that the words out the next race in NY will be even bigger. Making the 200x class Great Again!


Congrats goes to national champ Jacob Hall winning $1 for every cc, netting him $200 for his big win from Four Stroke Tech.