1986 Honda 125M Plastic replacement fuel tank question

[Roosteak]

I am currently searching for a fuel tank for the 1986 125M Honda and a couple of guys have told me that the plastic tank for the 200cc machines fit well and look like it belongs. I believe it would be the wide open brand and not the clarke Does anyone have this modification on their machine? Please provide a picture if you can and any information as to fitment issues. Thanks.

[TrickShot]

I just got an 86 125M, and have a plastic tank for a 84 Honda Big Red 200ES laying around. I will try and check tonight when done with work or tomorrow, if no one else chimes in. Although my plastic tank is a Clark I believe.

[TrickShot]

Well even as cold as it was, I got outside and checked this out for you today. As I said the 200ES tank I have is indeed a Clarke tank. It was not wide enough to even slide over the frame. It was close but being -10 outside I wasnt going to mess around trying to spread it over frame as I've heard may have to with plastic tanks. I did have a plastic 250sx tank with me as well and that actually almost fits good, except it's too long and can't attach mounting bolt. I took some photos anyway for an idea with the 250SX tank on the 86 125M.







Last pic here I just placed fenders on, they don't fit obviously because tank is too long.

[Roosteak]

Thanks so much for doing that as cold as it is this weekend. Very helpful. I have received a couple of messages that the 200 tank looks good 82 to 84 but seems like that would not be the Clarke tank from what you have found. Thanks again.

[TrickShot]

It's going to warm up next week. I will double check that clarke tank, and if anything changes, I will put a post in about it.

[Chadwilliams]

Roosteak,did you find a tank to fit?I'm in your same situation