atc70 flat track wheels and tire info needed

[ATC704LIFE]

Ok guys I wanna do slicks on my 70 but can't seem to find any info on it any info will be appreciated thanks

[aramid]

.
it depends on what type of track you will be running them on . . the link below shows several different brands . . the hoosiers are xlnt but a bit overkill for your app.

http://www.ebay.com/bhp/flat-track-tires


duros are popular

https://www.rockymountainatvmc.com/s...0track%20tires

[CRAZY70MAN]

We run standard 3 bolt american cart pattern. They vary in 5 or 6 inch diameter and have many different widths. You will need to have a set of stock hubs turned down to fit inside rims and drill and tap holes. Kart wheels all over ebay, just make sure the bolt pattern is correct.

Here is a site I buy wheels from.
https://www.bmikarts.com/mobile/home.asp

Here is another 150cc electric start flat tracker in the works as we speak

[tecaterob]

I'm going to do the kart wheel setup.

[CRAZY70MAN]

I'm going to do the kart wheel setup.

You will love it, absolutely a blast!

[big specht]

But dangerous/fun in the wet grass

[CRAZY70MAN]

But dangerous/fun in the wet grass

You know it. Like restrictor plate racing when there is a few of em. Lol...I really miss summit indoor flat track.

[big specht]

Yep we were just talking about that last night. That sure surprised a lot of people on how fast they are, Rex's fastest lap time was 2 seconds off the fastest quad lol that really made them think then

[redsox]

Anyone have pics of the turned down/ modded hubs? Any of you Mad 70's guys still out there?

[big specht]

There might be pics of the turned down hubs in the mad 70's thread. We haven't been racing them as much as we did every body got older and life happend

[redsox]

I looked through 50+ pages. Most of the photos got swallowed by photo bucket. If there were pics, they might be gone.

[bkm]

Hey bean eater, do you have a set of 70 hubs you can send me? I've got lazer cut flanges that I used to build my kart hubs with. I can try and turn your hubs down and use my flanges to drill the bolt pattern.

Sent from my SM-G900V using Tapatalk

[big specht]

this is the only pic I have right now of one of the hubs I cut down. It's for a aircooled R project

[redsox]

Hey bean eater, do you have a set of 70 hubs you can send me? I've got lazer cut flanges that I used to build my kart hubs with. I can try and turn your hubs down and use my flanges to drill the bolt pattern.

Sent from my SM-G900V using Tapatalk

yes i can!

[stoshu]

Here’s one with too many holes drilled and tapped. Make sure it’s centered. Some of you might recognize the red bike in the background. It’s a long way from home.