//ArrowChat Code
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 28

Thread: 10 in wheel Time is here again Jump in line guys

  1. #1
    Join Date
    Jan 2003
    Location
    Cincinnati, OH
    --
    3,289

    10 in wheel Time is here again Jump in line guys

    .160 custom spun wheel halves welded, They have no valve stem holes so you can put them where you need too!


    the price 125 + 15 to ship!



    Here is one that was installed at TF and rode all week Itrike can confirm it!






    Here is an unground 250r hub inside the wheel too!





    These will fit the COOL 86-87 tecates Pictures for the tecates will be at the bottom

    10 inch wheel on 85 200x with 86-7 200x front hub!









    OK lets clear this up!!!

    1985-6 250r Clears the hub wont clear MOST caliper need to take 4mm off the 1st and last caliper fin

    1985-6 350x Clears hub caliper bolt on deal

    1986-7 200x WILL FIT!!

    Also will fit 1st Gen 200x with hub swap from a 86-87 200x and small amount of grinding on the caliper!!!


    1986-7 tecates clears hub and caliper with no problems

    Will not fit the Tri-z with out putting honda forks and hond hub on your triz you need 86 tripples to do so! It wont fit with just changing the triz hub to a 250r one sorry i tryed!
    An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................

    GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    "MR.Clean"

    New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412

  2. #2
    Join Date
    Oct 2004
    Location
    Maryland
    --
    3,077
    I need 2 wheels.
    And that's the rest of the story. ~ Paul Harvey

    "Yes its broken, but does that really surprise you?."
    "What happened? What does it look like happened?!?!"

  3. #3
    Join Date
    Dec 2013
    Location
    Oregon
    --
    41
    Will it fit 83-84 250r?
    Thanks.

  4. #4
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,446

    Cool

    Quote Originally Posted by Blue Viffer View Post
    Will it fit 83-84 250r?
    Thanks.

    YES (I believe); All the rims (ATC70 as well) I have bought from X Owner, fit, look and line up great. Some need MINOR caliper relief.

    He couldn't make these group buys any easier....
    All our government does is distract us while they steal from us, misspend our tax $ and ruin our country

  5. #5
    Join Date
    Nov 2012
    Location
    Waldoboro, maine
    --
    791
    Isn't the 83-84 250r hub the same as 83-85 200x? If that's the case you would have to switch to 86-87 200x hub.
    82 250r
    83 Big Red
    85 Auto-x
    If you've done business with me please leave me feedback
    http://www.3wheelerworld.com/showthr...ght=Bren_downe

  6. #6
    Join Date
    Jun 2010
    Location
    Oklahoma
    --
    33
    Put me down for one please.

  7. #7
    Join Date
    Mar 2010
    Location
    Arizona
    --
    843
    Where are the pictures of them installed on the 86/87 Tecate? You mention they will be "at the bottom" but I don't see them.

  8. #8
    Join Date
    Sep 2013
    Location
    North Dakota
    --
    21
    Put me down for one

  9. #9
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,446
    Anyone can start the list in order, and edit who has paid or will pay whatever amount of money.....
    All our government does is distract us while they steal from us, misspend our tax $ and ruin our country

  10. #10
    Join Date
    Jan 2003
    Location
    Cincinnati, OH
    --
    3,289
    Trikegasm
    Horbie
    Louis 2 wheels
    Derrick Adams 2 wheels
    Harry 1 wheel
    Jason Barton 1 wheel
    Matt 2wheels maybe 3

    Jump now im ordering 12 tomorrow. Thanks guys
    An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................

    GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    "MR.Clean"

    New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412

  11. #11
    Join Date
    Jul 2012
    Location
    Seattle, Washington
    --
    1,543
    Quote Originally Posted by christph View Post
    Where are the pictures of them installed on the 86/87 Tecate? You mention they will be "at the bottom" but I don't see them.

    Heres you go:

    Click image for larger version. 

Name:	image.jpg 
Views:	26 
Size:	1.59 MB 
ID:	198846

    Its an 85 T3 with the 86 T3 front end.
    Attached Thumbnails Attached Thumbnails image.jpg   image.jpg  

  12. #12
    Join Date
    Jan 2003
    Location
    Cincinnati, OH
    --
    3,289
    Quote Originally Posted by 3 Wheel Drive View Post
    Heres you go:

    Click image for larger version. 

Name:	image.jpg 
Views:	26 
Size:	1.59 MB 
ID:	198846

    Its an 85 T3 with the 86 T3 front end.
    Im guessing that is a 2nd gen front end on a 1st gen!? Nice bike!
    An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................

    GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    "MR.Clean"

    New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412

  13. #13
    Join Date
    Jan 2009
    Location
    Louisiana
    --
    145
    Put me on the list for one

  14. #14
    Join Date
    Jan 2003
    Location
    Cincinnati, OH
    --
    3,289
    Trikegasm PAid
    Horbie PAID
    Louis 2 wheels
    Derrick Adams 2 wheels
    Harry 1 wheel
    Jason Barton 1 wheel
    Matt 2wheels maybe 3
    drsung 1 wheel

    Guys my paypal is jonathan3333333@yahoo.com wheels are 125 plus 15 for shipping. Paid for your wheel to lock it in
    Last edited by Xowner; 08-12-2014 at 11:07 PM.
    An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................

    GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    "MR.Clean"

    New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412

  15. #15
    robertc's Avatar
    robertc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Nov 2012
    Location
    Ohio
    --
    233
    Possible to get one without any bolt pattern, or center hub hole machined?
    1986 ATC 250R
    1986 ATC 250SX
    1987 Big Red
    1984 ATC 70
    1983 ALT 50

//ArrowChat Integreation Code //