//ArrowChat Code
Results 1 to 6 of 6

Thread: Heald + Rokon = Taurus 2x2 All Terrain Bike!

  1. #1
    TrickShot's Avatar
    TrickShot is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2010
    Location
    Delaware County New York
    --
    358

    Heald + Rokon = Taurus 2x2 All Terrain Bike!

    Any one come across seeing one of these before? I was browsing YouTube and I came across this cool looking bike. It's a Russian Taurus 2x2 kit you can build yourself, much like the Carl Heald kits I am guessing. It sports 2x2 drive and is lightweight, breaks down to fit in couple small bags for easy transport too. Check out the video and couple links I found.
    https://www.youtube.com/watch?v=USHGxDp10D0


    some quick specs.
    Taurus 2
    Axels – 2×2
    max . speed 60 km.chas ( a 3- speed version)
    Engine 2 x cycle. 5-5.5 hp.
    transmission – centrifugal clutch
    gears -2 (3)
    disc brake on the intermediate shaft
    carrying capacity of 180 kg .
    Fuel – 1.2 L / hr.
    Wheel camera UAZ
    wheel diameter – 740 mm .
    Wheel width – 220 mm.
    tire pressure – 0.13 kg / cm.
    Ground pressure min. – 0.04 kg / cm.
    clearance – 370 mm .
    steering angle of the front fork 55 – degrees.
    Seat height – 750 mm.
    tank capacity – 5.3 liters.
    dry weight – 47-50 kg.
    minimum – time showdown 10-20 sec. ( detached front fork )
    during disassembly max . – 2-4 min. ( includes two bags in the trunk of the Oka )

    couple links for more info.
    http://mikeshouts.com/taurus-2x2-terrain-motorcycle/
    http://bangshift.com/general-news/ca...d-it-yourself/

  2. #2
    Join Date
    Aug 2004
    Location
    Ab Canada
    --
    4,368
    That is freakin cool! I think i need one haha
    1985 Tri-Z-

    Quote Originally Posted by mywifeknowseverything
    Just hit the Freakin Gas and Hold on!!!!!

  3. #3
    Join Date
    Mar 2013
    Location
    Central PA
    --
    2,362
    Super cool but the whole fits in a suitcase is kinda misleading. More like fits into a few suitcase sized bags.
    Any idea on the cost and if they import them? Cant be more than a couple hundred i would think.

  4. #4
    TrickShot's Avatar
    TrickShot is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2010
    Location
    Delaware County New York
    --
    358
    According to the links, the plans to build one yourself would be about $37 and for a bike $980 if I understand it right.

  5. #5
    Join Date
    Mar 2013
    Location
    Central PA
    --
    2,362
    Quote Originally Posted by TrickShot View Post
    According to the links, the plans to build one yourself would be about $37 and for a bike $980 if I understand it right.
    I don't think it's $1k cool. But still neat.
    So many better bikes you could get for that money.

  6. #6
    Join Date
    Apr 2010
    Location
    Cold Lake, Alberta, Canada
    --
    537
    That's cool!


    [B]
    1973-74 Honda ATC 70 Chrome Custom

    Argo (ODG) Taurus 650, Pacesetter WR-PIII, Commuter 380, TE390, Granger, Sasquatch, John Deere AMT 600, Honda 250es & sx

    Trikefest Survivor: 2014, 2015, 2016
    Trikefest Alberta: 2017, 2020

    Trikefest 2015 A.K.A MUDFEST
    Coolpool: TURN!
    hoosierlogger: I'M TRY'N TO TURN! (Riding his ALT50)

//ArrowChat Integreation Code //