1984 200x build with pics.

[lokisbuddy]

got fender on with no guesswork lol I just made a template drank a 6 pack and got s$%^ done replaed brake pads in front lol being it only has front brakes they must have been abused new brake pads needed some mods to caliper and shims on caliper mount but all done waiting on my tank from powder coat and when I get my swinger bearings and wheels/tires its go time. bench broke motor in this thing runs like a scalded dog!!

[lokisbuddy]

I thought about the r fender but I like the x fender better.

[DohcBikes]

Got something not too many people have there, and you made it look GREAT!! Good quick work man this is a fun thread to follow.

[slashfan7964]

Looks awesome! Little thing with the motor, it's all black except for a few fins up on the head.

You've got the 86-87 fender one there now, please tell me you are going to retro fit an 86-87 rear on it. I'm not much of a fan of mismatched fenders but it's not my trike to gripe about. I have faith you'll make it look good.

[lokisbuddy]

All the fins are bare allum. as for matching rear.. prepare to be dissapointed bevcause when i have the coin to spare I'm putting a modded set of rears from a 525 outlaw on it with outlaw seat. was looking at my buddies today and i know how I'm gonna do it. sadly he wouldn't let me "show him" on his set.

[slashfan7964]

That will be rather interesting....

[lokisbuddy]

I ordered bars bar pad and grips today. going downstate tue to pick up 2 more bike i got cheap. i now have 3 cr 250s and 2 kx 80s. once i re do the new kx and sell i will be buying my 525 stuff for the x or "marlyn" as i call her.

[lokisbuddy]

Oh i see what u mean about head. not done with it. need new polishing bits for my die grinder.

[84trimoto125]

nice build looks really good

[lokisbuddy]

Waiting on parts build is paused till then prolly Monday. btw if anyone knows where the crankcase vent tube goes let me know please. I have it hooked up to motor and the one tube that hangs down. I was thinking of installing a nipple on the air box to mount it to.

[lokisbuddy]

Just got my seat cover put on. took me forever and I have a dozen Guinness extra stout in me so not sure if its straight lol. What do you think?

Edit: Don't mind the kids toys and junk in the background. I had to do it in the kids play room for peace and quiet..(go figure)

[lokisbuddy]

got a little more done got my seat cover on, new bars, bar pad, grips, and got my 400ex hubs and brand new rims and tires. heres some pics. (the pic of the bike with the tank is the tank off my other x im building the tank for this one isn't back from pc yet.) I also cut the rear plastics due to them being shredded so I saved as much as possible. enjoy the pics so enjoy and feedback is appreciated still waiting on swingarm bolt from machine shop. also got a new helmet. and did the compression test with the new top end. is that a lil low for a new top on a 200x?

[DohcBikes]

Lookin good!!

Compression looks fine. It will go up some as the rings break in.

Just be sure to have the throttle wide open and the choke off or open to achieve the max reading.

You said you used a .020 Wiseco piston that was ran in an xr200 for six years, its not a new top end

[lokisbuddy]

Lookin good!!

Compression looks fine. It will go up some as the rings break in.

Just be sure to have the throttle wide open and the choke off or open to achieve the max reading.

You said you used a .020 Wiseco piston that was ran in an xr200 for six years, its not a new top end

by fresh top I meant fresh rings and hone and didn't have throttle cracked at all lol yeah prolly needs a couple hours on her to seat rings.
Edit:misspelled "Fresh"

[lokisbuddy]

ok guys finally got my swingarm bearings in (thanks Paul Waslin from AllBalls Racing for lookin out) just need my swinger bolt (should be here tomorrow) my tank from pc, a 110 main jet and lug nuts for my 300ex hubs then shes done till I get the 2stroke in her. I love her stance now. shes wider than my grizzly's and almost as wide as one of my CR250s lol what do you think so far?