wheel nut size / tire fell off !

[steck]

anyone know the wheel (axel) nut size for the Honda ATC 110/125..


the wheels came off.. so to speak..on its last ride..

[Big G]

That's why it's important to make sure the cotter pin's in! At least no one was injured

Sorry, don't know the nut size off hand.

[barnett468]

anyone know the wheel (axel) nut size for the Honda ATC 110/125..


the wheels came off.. so to speak..on its last ride..

Hello

ATC 125 is front 12 mm X 1.75 mm thread, rear is 14 mm X either 1.50 mm or 1.75 mm thread castle nuts available at honda shop or industrial hardware store not at home depot..

You need to list whether it's a 110 or 125 next time, it can not be both.

[steck]

Hello

ATC 125 is front 12 mm X 1.75 mm thread, rear is 14 mm X either 1.50 mm or 1.75 mm thread castle nuts available at honda shop or industrial hardware store not at home depot..

You need to list whether it's a 110 or 125 next time, it can not be both.

hey thx. i always thought the 110 was identical to the 125m for the most part.

yeah, i did some checking and came up with 14mm castle nut (1.5 fine thread). very hard to find around here..

i found some M14 nyloc nuts that i thought would work, but a buddy said 'no, you have to use a castle nut with washers, and the cotter pin..

[barnett468]

Hello


hey thx. i always thought the 110 was identical to the 125m for the most part.

Yes but not everything so I think it’s best to say exactly what your bike is.

xxxxx

yeah, i did some checking and came up with 14mm castle nut (1.5 fine thread). very hard to find around here..

You don’t have an industrial hardware supply store I’m guessing.

xxxxx

i found some M14 nyloc nuts that i thought would work, but a buddy said 'no, you have to use a castle nut with washers, and the cotter pin.

You definitely need a thick hardened flat washer the nyloc will work but needs constant checking. It will not fall off like your other one. Torque axle properly.

Washer Item #1 and nut #13.
http://www.cmsnl.com/honda-atc125m-1...7.html#results

[barnett468]

That link i gave you has those original parts available $2.50 each.

[steck]

hey thx ! thats why i come on here !!