First Time Rider
Arm chair racerNew to the board
Im wondering if anyone knows of a brake caliper that would swap over to the tri z front mount? I have a brembo dual piston caliper for the rear. It will be mounted on a banshee bearing carrier with a custom mount built just for the caliper. Here is a link for the schematic. http://www.oppracing.com/images/cmsu...P%20brembo.pdf . Any info on this would be greatly appreciated.
First Time Rider
Arm chair racerNew to the board
Found out that the brake caliper is a direct bolt on for the front mount so if anyone is looking to upgrade the front brake the rear brembo brake caliper from a ducati monster will work for the front brake.
Dirty Main jets are my bane.
4 Wheels? Huh?
well if it fits the front the rear caliper is the same as the front so shouldnt it work on the rear also?????? Pictures?
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
First Time Rider
Arm chair racerNew to the board
I don't know how to upload pics on here from my phone. I have been taking alot of pictures on this tri z build so once i get the screen replaced on my laptop i will post them all in the build thread. I was trying to get a bearing carrier made with a custom mount but nobody wants to get back to me. I want to find one that is a direct bolt on for the stock bearing carrier. The closest one i found so far is 100mm and the stock carrier mounts are 98mm.
Power User
Teaching quads a lesson
several older calipers will swap with the tri z. Do a google search and you will find them. I used to have the link.....I will look for it....
•YZ125 - 1988 (rear)
•RT180 - 1990 to 1997 (front)
•TT225 - 1986 to 1987 (front)
•TT-R225 - 1999 to 2005 (front)
•XT225 - 1992 to 2000 (front)
•YZ250 - 1988 (rear)
•XT350 - 1985 to 2000 (front)
•XT600 - 1990 to 1995 (rear)
Yamaha ATV Brakes :
•YFM350X Warrior - 1987 to 1988 (front)
•YFZ350 Banshee - 1987 to 1989
I beleive that is the post.........I have used some of the tt fronts off ebay just cause I found them cheap. Good luck
Last edited by CRAZY70MAN; 09-17-2012 at 09:01 PM.
HEY YOU WORM PICKERS..QUIT PICKIN' MY WORMS!
Owner of the world' widest atc plow
Builder of 3 wheeler accessories such as Big Red suspension sidecars,Big red's with full roofs, 3 wheeler elevators, and NOS powered 2 speed tri zingers
"Hold my beer.......watch this sh@# !!!!!!
Loves Corn.
Catch me if you can
there's not several... there two.... xt 350 left front.,,,,, and the XT 225
Dirty Main jets are my bane.
4 Wheels? Huh?
Can you email them to me? jonathan3333333@yahoo.com or pm me and ill give you my text cell phone to text it to meOriginally Posted by XxMurdocxX
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Loves Corn.
Catch me if you can
Nice list andy!
Last edited by Bryan Raffa; 09-19-2012 at 07:01 AM.
First Time Rider
Arm chair racerNew to the board
Do the twin piston calipers from the XT 225 fit the front of the Tri Z?
The home of the Enduro Alaska video series:
http://www.youtube.com/user/MisterBigWheel?feature=mhum
Loves Corn.
Catch me if you can
banshee and warrior pads will work,,,,,, not the caliper.. take a look where the line connects.. gonna have to go through that list and double check.
Reply With Quote
