BW 200 chain adjuster tool I NEED ONE

[big specht]

I'm looking for the tool that adjusts the primary chain on the 200 big wheel or a pic of the tool so I can make one I'm tired of using a chisel/punch

[big specht]

Nobody has one ??????

[big specht]

So nobody has ever seen one of these or has one??

[hoosierlogger]

Did you ever find one of these? I am in the hunt for one as well. Nearest I can tell it is a 28mm nut.

[86T3]

I didn't have one and my bushings were froze up. I ended taking the whole swinger off and pressing the bushings out with a c clamp and sockets. When I got them out I cleaned the bores with some 800 grit sand paper and did the same tothe bushings. I put everything back together with never seize and they rotated freely so I could turn them easily with a screw driver. Only advice I can give on the tool is to take everything apart like I did, measure the nuts and cut a tool out of 1/8" flat stock.

[kiser]

We have talked about making one out of flat stock like you said. Just havnt got around to it lol. Its hard to believe that they are that hard to find though?? Somebody somewhere has to have one!

[hoosierlogger]

Mine turns by hand a little, but I dont want to go at it with a screw driver. There is a time in my life when I would have done that without thinking twice, but not any more.

[86T3]

Mine turns by hand a little, but I dont want to go at it with a screw driver. There is a time in my life when I would have done that without thinking twice, but not any more.

I dont think I made it clear how easy they turned. I didn't have to pry them or chisel them, I just had to use a screw driver cause my fingers didn't fit in.

[hoosierlogger]

Oh I see, I might give it a shot. I just figured they would have to be persuaded with a .

[big specht]

Yea I never found one ,I would like to see a pic of one at least, I'm plan on tearing the rear end out of mine before TF this year and doing some maintance. As of now me and kiser are planning taking them out this year and do some big wheel riding this year

[86T3]

http://m.youtube.com/#/watch?v=S4PMKbRVZZc

This is what i watched before i did mine, helped me out a lot