12x12 shed out back
Got The Holeshot
Arm chair racerJust too addicted
12x12 shed out back
Power User
Got the holeshot
this is my powder coat room. and of course place to work on things when not spraying. its attached to a full garage. this room is 20x10.
if anyone wants/needs sandblasting or powder coating let me know. got all the abilities and tools for it. the blast cabinet is 4 feet long so i can do trike frames, rims, swing arms, etc... and the oven is 6 feet long so no problem there for cooking just about anything.
TPC TRIKES
FSU Powersports
RNS Powdercoating
The Enthusiast.
Teaching quads a lesson
I built a 12x16 pole building with a concrete floor for less than half of what they want for those junk kits. DIY and have way more for way less.Originally Posted by Xpress
Just Too Addicted
Arm chair racerJust too addicted
'85 Honda 200X
'85 Honda Big Red 250es
'85 Honda 250R
'82 Honda ATC 70
'87 LT500R Quadzilla
BRUP!!!!!!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
Here's mine: 200x project in progress...
1985 ATC250sx
1984 ATC200s
1984 ATC200x
HONDAS FOR LIFE!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
New to the board
Arm chair racerNew to the board
I'm going to have spray foam insulation put in my shop after I research it and find a good company to do it. So far I'm leaning towards the closed cell foam. Any recommendations from anyone with experience in it being put in your shops? Today it hit 85 deg here and it was 96 in my oven, I mean shop. In the heat of the summer it's about 120 deg in there and I just can't deal with that.
At The Back Of The Pack
Arm chair racerFirst time rider
May i ask why convential insulation wouldn't be acceptable. It seems like so much more cost for the shop, whereas your home is heated 24 hours a day that little extra the cell insulation would save would be worth it. I can't see it in a shop, with the overhead door and whatnot.
1985 Honda 250sx. Ground up rebuild. SOLD
1986 Honda 250es Big Red with custom plow
Don't waste your time, or time will waste you.
Got The Holeshot
Arm chair racerJust too addicted
It's not spotless-it's the workshopAttachment 230790Attachment 230791Attachment 230793Attachment 230794[ATTACH=CONFIG]230795[/
ATTACH]
Got The Holeshot
Arm chair racerJust too addicted
yaegerb
The day begins with 3WW
Why do all your pictures look like they were taken in the late 70's. Is that a mode on your camera or something?
Got The Holeshot
Arm chair racerJust too addicted
Ha! Your right. It is a bit out dated. And at LEAST needs to be cleaned up. I was out there this morning, taking the China carb off my sons 70(which I'll have some questions about later), because it's leaking. I do like old stuff and have a hard time throwing some items away.
At The Back Of The Pack
Arm chair racerFirst time rider
I think he meant the quality of the photos looked like taken with a camera from the 70's
New to the board
Arm chair racerNew to the board
This summer its getting insulation, new lighting, cabinets and if all goes well a 250R! lol (As long as I can sell some to make room and please the wife... Hence the last photo...Fix em, sell em,...make room for more!)
Last edited by Snyderman; 05-01-2016 at 09:59 AM.
Got The Holeshot
Arm chair racerJust too addicted
Ok. So my phone has like 12 different color modes. Guess I don't have an eye for that. Just update it to this:
Reply With Quote
