Dose anybody have some pics of a Ram steering stabilizer installed on a 85-86R. I found a couple of them upstairs in my stuff and its been years that i put on one. I would like to put it on my 85R build. Any help would be great. Thanks Glenn
First Time Rider
Arm chair racerNew to the board
Dose anybody have some pics of a Ram steering stabilizer installed on a 85-86R. I found a couple of them upstairs in my stuff and its been years that i put on one. I would like to put it on my 85R build. Any help would be great. Thanks Glenn
Power User
Roostin Away
I can't find pics but it should mound up on the bottom of the triple tree and then under the gastank somewhere. you probably already know all this though
hope this helps
Life is better on 3 wheels
1984 200es big red
1976 suzuki rm125
1983 honda 250r (minty fresh) SOLD
1986 honda 350x (A PILE....for now)
197? honda 90 (pauter framed little beast in the making)
Power User
The day begins with 3WW
hahahaha oh man... that one made my night.. thanks for the help..Originally Posted by HONDA_ATC_FREAK
One end bolts to the head stay on the rh side, the other end uses the r/h rear front fender bolt. You also have to trim part of the r/h radiator cowling on the inside.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
Got The Holeshot
Arm chair racerJust too addicted
I'd be interested in seeing that installed and using one if there is any advantage to it. Thanks
]1986 ATC 330R
1985 ATC 250R vintage PSI racing ported motor
Get your replacement ATC 250R decals and custom Big Bore #'s here http://shop.3wheelerworld.com/catego...=2&pagegroup=1
Just Too Addicted
Arm chair racerJust too addicted
This is the volkswagon hood lift basically? I've been thinking about one of these. Let me know how it works!
First Time Rider
Arm chair racerNew to the board
Thanks Guys, The problem I think I have is I'm trying to use it with a short track set up and I cant see that it will clear at total lock. Ill play around with it and let you know. As far as the ram it is a steering stabilizer off a VW not a hood lift if I remember right. I might play around with making a kit with the new ram that is used on the quads today it is half the size. Thanks Glenn
Power User
Roostin Away
here are some pics I had in my files from 3ww...not my bike just reference pics. I have used these type of stabilzers on quads and they are from a VW Steering. Hope this helps
1985 Tiger 250LC
1985 Tiger 200LC
1985 ATC 350X
1985 ATC 200x
1973 ATC 70 (resto project)
ATC 70 Full A+ Suspension Mini Tiger
and many more!!!
1991 District-6 Open 4 Wheel 4-Stroke Expert Hare Scramble Champ
Blue Line Graphics
Custom and Reproduction Decals
http://www.bluelinedecals.com/
New to the board
Arm chair racerNew to the board
Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers.
Catch me if you can
Good god Julle, that is TRICK!
85 Tri-Zinger 60
85 ATC250SX
86 ATC250SX
87 ATC250SX
02 XR650L conversion
84 ATC 480R
At The Back Of The Pack
Arm chair racerAt the back of the pack
its like the powersteering atv of the 80s lol
Power User
The day begins with 3WW
I'm going to have to agree.. very niiice.. fill us in..
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
New to the board
Arm chair racerNew to the board
Thanx! I like it, much more stabile now. Its adjustable in 7 steps from soft to hard as hell.
Got The Holeshot
Arm chair racerJust too addicted
Yeah thanks. Is there really a advantage to using it on a trike
1985 ATC 250R vintage PSI racing ported motor
Get your replacement ATC 250R decals and custom Big Bore #'s here http://shop.3wheelerworld.com/catego...=2&pagegroup=1
New to the board
Arm chair racerNew to the board
Its a cheepo Ebay stabilizeer, 110mm stroke(perfect for the wide 81-82 tripple) and 7 steps adjust and its rebuildable. Forkclamp is 2 fatbarclamps put together and bored out to 30mm. Welded a mount to the steering head.
New to the board
Arm chair racerNew to the board
In ruff terrain it helps a lot on my 82 to keep it going straight. But the 82 dont have the suspention like a 86 so you might not need one but it looks really cool that was enuff for me really.
Reply With Quote
