//ArrowChat Code
Results 1 to 15 of 15

Thread: can i do this?

  1. 07-23-2010, 01:24 PM #1
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736

    can i do this?

    as some of you might know finding a 4x130 aluminum rim thats 9 inches tall and 9 inches wide with a 5x4 offset is quite hard.
    i have one rim with these dimensions that has the 110 and 130 bolt pattern, the other i bent in a crash a while ago. im trying to find another rim to match it now, but i cant find anything (im guessing the 110 and 130 rim combo is old and rare, they are Douglas aluminum rims or DWT)

    I could just buy a pair of 200x Hubs for the 4x110 pattern right? will all years of 200x hubs match my axle splines? do all 200x years have the 110 bolt pattern?
    what other models could i use?
    i still have a few phone calls to make but if i cant find that rim then ill have to get some new hubs so i can have my aluminum offset rim to match the one i already have (the offset improves handling quite a bit)

    or if someone has one to sell? hit me up
    Reply With Quote Reply With Quote
  2. 07-23-2010, 01:59 PM #2
    atc350xer's Avatar
    atc350xer
    atc350xer is offline The Enthusiast. Teaching quads a lesson
    Join Date
    Jan 2010
    Location
    Beaver Falls, PA
    --
    2,666
    Quote Originally Posted by Mr_RPM View Post

    I could just buy a pair of 200x Hubs for the 4x110 pattern right? will all years of 200x hubs match my axle splines? do all 200x years have the 110 bolt pattern?
    yes, yes, and yes


    Feedback Thread : http://www.3wheelerworld.com/showthr...-for-atc350xer
    Reply With Quote Reply With Quote
  3. 07-23-2010, 02:06 PM #3
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    sounds good. thanks
    i can get a set for 40 bucks on ebay. looks like my solution.
    Reply With Quote Reply With Quote
  4. 07-23-2010, 03:15 PM #4
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    oh jeez, i found extended hubs on ebay. would be going with these hubs and the offset rims make it to wide or not (plus 5ish inches overall) it would be cool to make it nice and wide for the dunes.
    anyone have problems with going wide on any trikes? other than not being able to fit in tight trails.
    or is it all an advantage to go this wide.
    Reply With Quote Reply With Quote
  5. 07-23-2010, 03:23 PM #5
    atc350xer's Avatar
    atc350xer
    atc350xer is offline The Enthusiast. Teaching quads a lesson
    Join Date
    Jan 2010
    Location
    Beaver Falls, PA
    --
    2,666
    keep in mind, 200x rims are 8"... you'd need 350x rims or similar if you want 9" rims on the 200x hubs


    Feedback Thread : http://www.3wheelerworld.com/showthr...-for-atc350xer
    Reply With Quote Reply With Quote
  6. 07-23-2010, 04:49 PM #6
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    ? im confused. the diameter of the rim has nothing to do with the hub just as long as it has the 4x110 bolt pattern. it could be an 8 inch to 10 inch rim and shouldn't matter.
    i dont understand what you mean.

    i plan on putting a 9 inch by 9 inch rim on the 200x hub. (offset 5 inches by 4 inches)
    Reply With Quote Reply With Quote
  7. 07-23-2010, 04:53 PM #7
    86trizinger
    86trizinger is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jul 2008
    Location
    MD
    --
    911
    300ex hubs are a little more offset then the 200x. Give you about 2 1/2 to 3 inches wider. I have them on my ATC 90 and 200x both. They work great.
    Reply With Quote Reply With Quote
  8. 07-23-2010, 04:57 PM #8
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    Quote Originally Posted by 86trizinger View Post
    300ex hubs are a little more offset then the 200x. Give you about 2 1/2 to 3 inches wider. I have them on my ATC 90 and 200x both. They work great.
    ill look into that. i found after market hubs for a 200x, 300ex ect (many other models as be know) that are extra offset http://cgi.ebay.com/ebaymotors/exten...s#ht_599wt_939 but dont know if that will be too wide with my offset rims
    and they are a bit expensive as i can get stock 200x hubs for half the price. maybe if i find 300ex hubs for cheap ill go that route.
    Reply With Quote Reply With Quote
  9. 07-23-2010, 05:00 PM #9
    86trizinger
    86trizinger is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jul 2008
    Location
    MD
    --
    911
    There is a pair of 300ex hubs on eBay right now for $40 shipped I thought I just saw.
    Reply With Quote Reply With Quote
  10. 07-23-2010, 05:01 PM #10
    86trizinger
    86trizinger is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jul 2008
    Location
    MD
    --
    911
    http://cgi.ebay.com/ebaymotors/HONDA...Q5fAccessories
    Reply With Quote Reply With Quote
  11. 07-23-2010, 05:05 PM #11
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    so i wonder how much wider/better the more expensive hubs would be. but ill probably go with the cheap 300ex ones.
    thanks again.
    Reply With Quote Reply With Quote
  12. 07-23-2010, 05:14 PM #12
    atc350xer's Avatar
    atc350xer
    atc350xer is offline The Enthusiast. Teaching quads a lesson
    Join Date
    Jan 2010
    Location
    Beaver Falls, PA
    --
    2,666
    Quote Originally Posted by Mr_RPM View Post
    ? im confused. the diameter of the rim has nothing to do with the hub just as long as it has the 4x110 bolt pattern. it could be an 8 inch to 10 inch rim and shouldn't matter.
    i dont understand what you mean.

    i plan on putting a 9 inch by 9 inch rim on the 200x hub. (offset 5 inches by 4 inches)
    I knew you wanted 9" tires on it, so I wanted to be sure you knew 200x rims were only 8", that's all


    Feedback Thread : http://www.3wheelerworld.com/showthr...-for-atc350xer
    Reply With Quote Reply With Quote
  13. 07-23-2010, 05:23 PM #13
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    im not going to buy 200x rims, just the hubs. the part where the rims bolt to.
    but i see what your saying
    Reply With Quote Reply With Quote
  14. 07-23-2010, 05:28 PM #14
    TDS
    TDS is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Feb 2009
    Location
    Toledo oh
    --
    132
    pretty sure ive got some 200x hubs $20 would cover my time and shipping if you want them
    parting 200x 250r 110 90 200s 350x

    honda 200 beater
    84 honda trx200
    85 200x newer and cleaner autox project
    My ebay store
    Reply With Quote Reply With Quote
  15. 07-23-2010, 05:45 PM #15
    Mr_RPM's Avatar
    Mr_RPM
    Mr_RPM is offline Power User Roostin Away
    Join Date
    Jan 2010
    Location
    Howell, Michigan, United States
    --
    1,736
    i will get back to you on that. after i finish getting my engine parts together and looking at how much cash i burned i might have to take that offer. but if i got more money then im gonna get the 300ex or the wide set. i got a grad part/family reunion tomorrow and we will see how much i rake in (since i already have college paid for).
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //