//ArrowChat Code
Results 1 to 7 of 7

Thread: Need Help Carburetor Question:will This Fit My Atc90

  1. #1
    Join Date
    Jul 2009
    Location
    San Diego,CA
    --
    31

    Need Help Carburetor Question:will This Fit My Atc90

    ok people i finally found a carburetor on ebay that i think it might fit my atc90 take a look at the pics and let me know if it will fit? thanks guys for all your help


    it's described like this?
    Brand New PZ19 Standard Of Japan 19mm Carb! 1 7/8" on center mounting holes. Manual choke and built-in fuel shut off valves. THIS IS THE CORRECT CARB FOR THE MINI TRAIL WITH THE CHOKE SET UP ON THE SAME SIDE AS THE ORIGINAL KEHIN !! Why repair or rebuild when you can buy this new unit. Jets are replaceable. Fits: Honda CT-70, Honda CT90, HONDA PASSPORT, HONDA CUB, HONDA SL, DAX AND All 72CC to 110cc China made AND Honda Engines. THIS IS THE DOUBLE INLET
    Attached Thumbnails Attached Thumbnails d7ef_1_sbl.JPG   d0d5_1_sbl.JPG   b40d_1_sbl.JPG   DSCF2038.JPG  

  2. #2
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    The carb will fit on your atc90. But the jetting will be incorrect most likely. so you will need to rejet it. As stated before, i think you could buy the right carb used and save alot of money and headache. I am running the same carb on my 110. It took 5 diffrent carbs with one being oem just to get something satisfactory. Some get lucky and some dont. you could buy a used carb and a can of carb cleaner, then be done with it.
    Never argue with an idiot. They will bring you down to their level and beat you with experience.

    Calling an illegal alien an undocumented immigrant is the same as calling a drug dealer an unlicensed pharmacist.

    1981 Wife ( Project)


  3. #3
    Join Date
    Jul 2009
    Location
    San Diego,CA
    --
    31

    re:carb

    ok i will do that i't jus that i cant seem to find a used one for the 90, and is it difficult to re-jet it?

  4. #4
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    You will need to buy a collection of jets. On mine i had leaking problems, jetting problems, the slide would get hung. If you buy this carb you will have to do a bit of work. but some get lucky. China carbs like this are junk.

    I have decided to help, here you go!!!!!!!!!

    http://cgi.ebay.com/ebaymotors/78-Ho...Q5fAccessories

    http://cgi.ebay.com/ebaymotors/TRX90...Q5fAccessories


    You might still need to rejet these but atleast you have high quality
    Never argue with an idiot. They will bring you down to their level and beat you with experience.

    Calling an illegal alien an undocumented immigrant is the same as calling a drug dealer an unlicensed pharmacist.

    1981 Wife ( Project)


  5. #5
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    the first one is your best bet. Buy it!!!!!!


    i could have searched more but didnt feel like spending more than 15 seconds on this.
    Never argue with an idiot. They will bring you down to their level and beat you with experience.

    Calling an illegal alien an undocumented immigrant is the same as calling a drug dealer an unlicensed pharmacist.

    1981 Wife ( Project)


  6. #6
    Join Date
    Jul 2009
    Location
    San Diego,CA
    --
    31
    thanks for your help
    You should never look down on someone unless you intend to help them up

  7. #7
    Join Date
    Oct 2007
    Location
    Minneapolis mn
    --
    4,067
    I would skip those b.s. china carbs... Try this joint out for a carb... I just cut it out of a C.L. ad here in the Twin Cities... He may have some 90 parts as well...

    "Tons of Honda three wheeler parts for ATC110, 125, 185, 200, Big Reds, and 250SX...........Need parts? Call (218) 969-3270"
    No trikes. Too old, too crippled. Unless I find one I can't live without!
    "You cant fix stupid" ~ Ron White
    My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe

//ArrowChat Integreation Code //