View Full Version : Oil Questions
mohadib
07-07-2009, 01:14 PM
Sorry for all the threads :S
My manual says use Honda 4 Stroke Oil for my 250r tranny fluid. Can I use any old 10w-40?
How much 2 stroke oil should I put in one gallon of gas?
Will using low octaine pump gas (86) cause poor performance?
Thanks
mohadib
07-07-2009, 06:46 PM
Sorry to ask a question thats asked all the time :s I went with 32:1 and used some nice yamaha 2 stroke oil. Looks a little smokey to me. Any thoughts on the tranny oil?
Thanks
AutoXer
07-07-2009, 07:08 PM
Don't use 86 octane. I consider 89 a bare minimum. As far as what ratio to run depends on the oil you use (syn or conv)
mohadib
07-07-2009, 07:26 PM
I bought 92 i think, best they had. Im using a non syn oil. THanks
Dirtcrasher
07-07-2009, 07:27 PM
I always bought a decent brand gear oil for any 2 stroke tranny I had. 6$ - 8$ a quart or something....... I use to run Spectro but there are ALLOT of great oils out there now. Go to a dealer and get something decent....
2 stroke gear box oils seem to break down quick from clutch wear and or water pump seals ever so slightly leaking.
The 4 strokes, I've run Valvoline forever and just change it often with no failures in 10 years plus :D
mohadib
07-07-2009, 07:33 PM
Cool, thanks Dirtcrasher. I'll get some from the Honda shop. Its an hour away though :(
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.