help 28mm carb 200x

[adamd]

ok i got a 200x 28mm mikuni carb from a guy who use to race 200x's and a intake manifold stamped mossbarger mfg th bolt holes on the manifold r just maybe 1/4 closer togther than the stock manifold ? anyideas ? im gona talk to the guy this weekend cas this may not be the 200x intake he also had 350x's and 250r's and other bikes. what can i use to bolt up this carb?

[coldfuzion76]

Looks like you might be able to use a piece of radiator hose in between that intake and carb, kinda tough to tell by the pics. The air intake MIGHT go back in the stick tube, but most "race" carbs and the like are designed to use a direct clamp on filter, I think.

[adamd]

i can get the airbox and carb hooked togther my problem is i cant attach the carb to the motor because the intake manifold is slightly diffrent does inyone know if a intake off another 3 or 4 wheeler will work with this carb?

[Mikeproc]

You could just weld up a piece of pipe close to the size of the carb on a flat plate of steel and drill the correct holes. Make your own!

[adamd]

never thought of this may do that iny other ideas?