View Full Version : 350x extended swingarm oics
Adam L
06-12-2009, 07:43 PM
Me and a buddy put 6 inches in my swingarm. hope everything lines up ok...
78593
78594
ceaserthethird
06-12-2009, 07:55 PM
Look out for the Rear Sprocket - Make sure it lines up ....
leevarnado
06-12-2009, 08:00 PM
what did you do to reinforce the swinger where it was extended??
Adam L
06-12-2009, 08:04 PM
I used 1 by 2 thick wall tube, it slides inside the stock tube. Welded it all up then plated the outside (overlaping it) with 1/4 metal. Welded it all up and then smothed it down.
AutoXer
06-12-2009, 08:48 PM
did you consider a cross brace at all?
Adam L
06-12-2009, 08:56 PM
yes i did, my buddy said their was was no need and I trust is judgement. Even though it will be my ass that wrecks for five minutes and not his.LOL
AutoXer
06-12-2009, 09:01 PM
sounds like you did a good job building it. Just looks nakid in the middle. Let us know when you get it mounted
KASEY
06-12-2009, 09:25 PM
the reason i would consider a gusset across the middle,,,,, is now you are exerting alot more twisting and flexing on the lower shock bracket and its only held on by 2 bolts,,,, i would build a box section support ,,, the workmanship tells me you have the skills so do it and be safe,,,,
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.