200X clutch

[joshco84]

Ok guys the title is pretty self explanatory, i can feel it slipping and getting a bit worse. Can you rebuild the clutch in these? I am mechanically inclined, thats not a problem, just need to know if its possible.

Thanks, its an 84 200x.

[hsstsss]

You can get new clutch plates and friction disc and you should just be able to pull off right side case and you should see your clutch basket and just unscrew the nuts

[MonroeMike]

Look for a manual in World Class Help. It shows you step by step.

[joshco84]

yep i found the manual actually, and a clutch kit on ebay for 45 i think, not too worried now. thanks guys.

[Danold]

You will need a special tool to remove the oil rotor and clutch hub. These can be easily bought for around $15 on ebay.

[harryredtrike]

not that hard of a job,take your time and read the manual,youll be fine

[coldfuzion76]

And don't be dumb like I was and completely forget about the gaskets. :wondering How could I have forgotten? :lol:

[AutoXer]

go real easy with the clutch nuts they break when you give them that lil bit extra

[joshco84]

Actually guys i figured something out. I did not have enough free play in my cable and it was making it slip. I adjusted it and got almost all the slip out. The cable is worn a little so i have a new one on the way, and am getting a new handle too. My perch and handle are wore out giving it too much slop and letting it not work right. Im hoping the new handle and cable take the end of the slippage out, (its very minimal now).