PDA

View Full Version : 400ex hubs on a tri z?


Dynofox
07-22-2003, 07:22 PM
Anyone know if the hubs off a 400ex will fit on a tri z?
TimSr
07-22-2003, 09:58 PM
I dont think they will fit. I think they are the same spline as the 250R. However, if your goal is to run 4/110 rims on your Z, 200X hubs will fit your Z axle.
Rod
07-22-2003, 10:13 PM
According to the james lucky catalog I have they both have the same amount of splines so they might fit. The 250r has 25 splines & the 400ex has 24 along with the 200x. If they fit let us all know. Good luck
Billy Golightly
07-22-2003, 10:18 PM
I've had 250R wheels with 350X hubs on my Z...when I first got it I didn't have any wheels and tires. I definetly cobbed them on there and I wouldn't reccomend it.
MR ATC
07-22-2003, 10:26 PM
I've had 250R wheels with 350X hubs on my Z...when I first got it I didn't have any wheels and tires. I definetly cobbed them on there and I wouldn't reccomend it.


:shock: sometimes you scare me :rolleyes:
Dynofox
07-22-2003, 10:54 PM
The reason i'm asking is because I was thinking of using the tires and rims off our 400ex in the up coming atv drag races. I figure the 20 inch tires would be better than the 22's on my Z right now. I'll have to give the swap a try this weekend, i'll let you guys know how it goes.
200xer
07-22-2003, 11:10 PM
my 200x hubs wouldn't fit on my Z, too tight.
YTZ250#1
07-23-2003, 10:02 PM
my 400 hubs would'nt fit my Z,I tried to do the same thing DYNO is thinking of and they were to small for the Z axle.
Billy Golightly
07-23-2003, 10:09 PM
I've had 250R wheels with 350X hubs on my Z...when I first got it I didn't have any wheels and tires. I definetly cobbed them on there and I wouldn't reccomend it.


:shock: sometimes you scare me :rolleyes:

Haha I said I didn't reccomend it. There was no welding or anything involved. And nothing was "injured" during the process. The Z got real rims and hubs like a week later, and the 250R hub/350X rim setup came apart and went back to the barn.
TimSr
07-24-2003, 09:49 AM
Ive got a set of Kawsaki Bayou front rims $/110 with some half bald tires that I run on the track, on 200x hubs on my Z.
Dynofox
07-24-2003, 09:13 PM
my 400 hubs would'nt fit my Z,I tried to do the same thing DYNO is thinking of and they were to small for the Z axle.

Well after reading this I guess I have my question answered. Thanks for the replys everyone.