PDA

View Full Version : would like some info please


factoryX
04-27-2009, 03:16 AM
will 85 foot pegs bolt onto a 86 atc/trx250r? would like to know for some reason 85 foot pegs are cheaper than the 86's:crazy:
Nick_R_23
04-27-2009, 03:24 AM
I think the 85/86 ATC pegs are the same, and the TRX pegs are different, but Im not 100% on that.

-Nick :TrikesOwn
factoryX
04-27-2009, 03:28 AM
86-87 trx250r are bolted with plates, 88-89 trx250r are bolted with pegs only...
I found a thread but idk about the info though, http://3wheelerworldforums.com/showthread.php?t=16702&highlight=trx250r+footpegs
factoryX
04-27-2009, 01:15 PM
oh come on I would like to know before some auctions end...
dcreel
04-27-2009, 01:34 PM
www.bikebandit.com and check the part numbers.
factoryX
04-27-2009, 01:49 PM
well both 85-86 atc250r are close but the 86 is one number off. but even if they had different part numbers they could bolt on still... 85 pegs are with in $10, 86 atc250r $20-$30, 86-87 trx250r $20-$50
factoryX
04-27-2009, 02:03 PM
and wow with the number of views of this thread I would think some one would know...
pmktm
04-28-2009, 12:48 AM
85 footpeg is 6 5/8" long [serated part] folding type

pin is 8MM 50 MM long

the opening is 25 MM

It is held onto the frame by two 10MM bolts on 50 MM center to center

I think that the TRX is nonfolding. the only trx I have is a 300 ex and the frame bolts are more that the 50 C to C of the ATC.

I could look at my 86 tomorrow or take a tape to yours and see what you come up with.:)
factoryX
04-28-2009, 01:17 AM
thanks! kudos!
pmktm
04-28-2009, 10:41 PM
factoryx, I cked on a 88 R and the CtC is 32MM and the peg opening is around 35MM

so they won,t swap with the TRX.:( :(
DeePa
04-28-2009, 10:50 PM
85 pegs work on 86 atc and vice versa. the 86 pegs were beefier, as well as their mounting plates.

The 86-87 trx pegs will attach to the 86 atc plate with no mods. 88-89 trx pegs are out of the question if you cant fab something up.
pmktm
04-28-2009, 11:58 PM
I gave him the spec. on my 85 and told him I would ck my 86 R or he could just ck his
with mine. I just happened to see a 88R at the bike shop while picking up my wheel today and put a tape on it. I have a TIG , MIG, lathe and mill machine so I can make about any thing fit. Just trying to help the fella out. Not trying to start a pissn contest.
wtfo