View Full Version : 200x Questions?
Dieselpower
04-26-2009, 10:25 PM
1. Is the 185 motor the same as the 200x motor besides the engine size?
2. How do you time the 185 motor?
3. Can you get a wider axle for the 200x?
I just bought a 200x but it has a 185 motor with pull start. The person I bought it from put a new timing chain on but I think it is timed wrong because it backfires and shoots flames out of the pipe.
harryredtrike
04-26-2009, 10:40 PM
it is a relatively easy prospect.take off outer cdi cover,2 bolts.then take off inspection plug by pull starter.there are two marks on the flywheel.you will need a flashlight.pull moter over till you see a line with a f and a t.find the t and look at cdi position,should be on the line 12 oclock.if lined up your good.
harryredtrike
04-26-2009, 10:42 PM
also pull plug its easier
Nick_R_23
04-26-2009, 11:20 PM
1. The 185 engine is kind of similar, its a pull start, semiautomatic engine. The actual 200x engine has kickstart and a clutch, and a higher compression piston, larger cam, and bigger intake/carb.
2. Buy a manual, itll make it much easier.
3. You might be able to find one, but they are rare. Your best bet is wheel spacers, wider hubs from a newer Honda 4 wheeler, or offset rims.
-Nick :TrikesOwn
harryredtrike
04-26-2009, 11:26 PM
plenty of manuals here on the site just search and download:postwhore
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.