Restored 1986 ATC250R pics?

[Micahdogg]

I've found a few photobucket albums that had very nice, walk-around, close shots of 86 ATC250R's....but I'm looking for a few more. Can anyone point me toward some either very very OEM restored atc's or clean survivors? I'm restoring mine right now and could use some various close up pics.

Micah

[sandpuppi101]

I have '85 pic's wanna see some of those or just the '86's ???

[Micahdogg]

I'll take a look at 85 stuff.

[pmktm]

I have two stock 85s and one 86 ATC 250R I will try to put a pic in if pm me your e-mail address and I can send them. or send me enough money and you can have one of each.

With pic below. I'm not good with this picture stuff.
Edit, the sticker on the front fender of the 85 is a 86 sticker.

The black #plate stickers are missing in the 86.

I also have a flat track kit.bfd eh.

[pmktm]

http://turnsleft.smugmug.com/photos/519366031_Qvhh4-M.jpg
I bought this 85 new in Oct of 84 it has stock bore, second set of chain and sprockets.

http://turnsleft.smugmug.com/photos/519360571_2g6SZ-M.jpg
I got the 86 from my best friends widow in 1990. After market muffler other wise stock
cept for the guards.

[AutoXer]

:drool: :drool: :drool: wow SweeeeeT!!!!
I mean that is a really nice pair!!!

[Autophysn]

agreed! Those are some really cool bikes!

[F4K]

Nice pair of Hondas. I want one so BAD!!!!

[edog]

http://i64.photobucket.com/albums/h196/edog_02/100_5293-1.jpg
http://i64.photobucket.com/albums/h196/edog_02/100_5298.jpg

[pmktm]

http://turnsleft.smugmug.com/photos/520187307_BNTrv-M.jpg

micahdogg, the 86 is at a friends house in my snowmobile trailer I will try to get over

there and get you some more pics. hth

[pmktm]

So how ya doing on your bike?

[Micahdogg]

Not much to update. I've started working on the engine. It was complete and running, but had each case side polished (and not repolished for probably 10 years). Some oem bolts were missing. There was some damage to the upper sprocket cover boss, etc... I really failed to anticipate how hard it would be to clean this thing up.

I removed the head, jug, water pump cover, clutch cover, and stator cover. Everything was cleaned, masked off, primed and painted which took quite a while to pull off due to the very rainy weather we've had lately. Nearly everything is painted right now and waiting for reassembly with new gaskets and some new bolts and nuts here and there.

I'm not rebuilding anything either. The motor ran fine and to keep costs down I'm not fixing stuff that isn't broken :)