Free Parts bike!

[TriMotoMan]

I just picked up a 1983 200x parts bike today for my 1985 200x, but its almost complete so im gonna put all the better parts on my 85 then restore the 83, lots of goodies after market skid plate, DG exhuast, after market kicker,Clarke tank, and he also gave me an 85 swingarm to put on the 83 when i restore it.

should i put the clarke tank on my nice 200 or keep the ims on it? i really like the clarke i'll sand it first so that it is bright white again.

oh and the parts bike also has all the rear grab bar and guards on it like for the chain and master cylindar so i will be putting those on my 85 as well

dont know the history on the engine but it doesnt run or kick over and its missing the carb, might turn it into an auto X for my buddies to ride

[braunz200x]

good stuff buddy your slowly becoming a trikeaholic :beer

[TriMotoMan]

haha thanks trikes are the best there is!, does anyone know how much fabricating is involved in putting a 350X engine into a 200X because i have a spare 350X engine that runs and would like to put it into the parts bike i just got

[acidburn]

id assume you are going to have to cut the frame

[factoryX]

try to get the 83 running...It is always good to have to running motors..Also, the 350x motor would not be worth putting in...

[TriMotoMan]

so it's to big to fit in the frame?

[factoryX]

well, you could say that...

[chris200x]

The 350x motor breaks apart the 350x frame like it's nothing. you'd have to do some major mods to a 200x frame for it to hold.

there was one on ebay a few months back. looked pretty slick.