tecate flywheel

[ovhonda1]

quick question about the flywheel. I have searched the forums and I understand how to get the flywheel off of the 86 tecate. I am getting low spark and the flywheel is covered with rust so I am wanting to check/replace my stator and maybe the flywheel. None of the forums tell you how to put the flywheel back on. Do I use a rubber mallet or just push it back onto the crank? Any help is always appreciated.

[81k]

i did my 85 t3 today, and I used the crankshaft bolt to pull it back on. It worked fine.

[DeePa]

align the key in the crank and push the flywheel onto the crank by hand, once all is lined up, put the washer on then thread the nut on, and tighten to torque...

[ovhonda1]

thanks. That is what I thought, but I didn't want to mess something up.