PDA

View Full Version : 250es No Fire???



mattcruff
01-19-2009, 08:53 PM
If i hold the black wire from the stator i get shocked. And i have checked the resistance on that wire. It was perfect. I also put a new cdi and a new coil on the trike. Still no spark. Do pulse generators go out? What would yall do? I have a good pulse generator i bought for my 250sx and never put it on, because it wasnt the problem. The wires are different but they are the same. (ES has one wire like a TRX and SX has that wire and a ground wire) should i try to wire it up? or are the different? What would you do? Any advice would be awesome.

bad350
01-19-2009, 08:57 PM
check your spark plug cap, i ran in to this on my R a few days ago. mine was stripped where it snaps on the plug

rebel33382
01-19-2009, 08:58 PM
check the on off switch

mattcruff
01-19-2009, 09:04 PM
All kill switch wires are cut, and the keyswitch hot wires are twisted together. Not The spark cap either i just bought a new coil, with cap. and if i hold the plug wire, nothing.

codemanlyons
01-20-2009, 03:30 AM
pickup coil is what was wrong with my 250es i checked everything else till that was the last thing left. put it on and ran fine agian..

mattcruff
01-20-2009, 10:53 PM
i hope its the pickup. another member is supposed to hook me up with a good one. i have one for my 250sx thats brands new, any one know if i can make it work? its got 2 wires and mine has one. does anyone have a stator for the 250es?