Using the "choke" as a temporary off switch?

[soon2becomeaowner]

Using the "choke" as a temporary off switch? Well i have some wiring problems. everything seems fine , all wires are connected. But the "off switch doesn't work. I would have to turn off the main switch, where it you can put it on "res" "on" "off".... Or i use the choke to shut off my motor.... You guys got anything to say?

[Xowner]

you might wanna take you switch apart and clean the contacts some times the will crode and get dirty!!!

[87 250SX]

Using the choke will eventually foul the plug out its not very good to use it as a kill switch.

[J.D.]

Just reach down and pull the spark plug boot off the plug, works for me!

[FullBore]

Just reach down and pull the spark plug boot off the plug, works for me!

How many electric shocks does it give you though? lol

[J.D.]

Shhhhhh ;) ;) ;)

[Yamaha_Rules69]

I use the choke to turn my 200x off all the time, and dosent hurt it one bit. My wiring is all screwed up, because I have two harnesses on it, one of a 200x, and one off a 200s, which the engine came off of. Im still trying to figure them all out. roll

[TimSr]

You can buy one of those $5 push button kill switch for a dirt bike, connect one end to the coil input spade connector and the other end to ground.