PDA

View Full Version : is this the reason my 350x is smoking picts


coleaclark
12-17-2008, 04:26 AM
is this the reason for its smoking??
blue27
12-17-2008, 06:10 AM
prolly not, that is the effect from it smoking. Check your cylinder, it is prolly worn. If you are this far, have it bored to the next size and install some fresh piston and rings. Before you bore it, check or have a machine shop check to see if it has been overbored already and what size piston you will need to order.
RapidRick
12-17-2008, 09:54 AM
Ring job, maybe new piston, and cylinder bore. More exploratory surgery required doctor. :(
brapp
12-17-2008, 12:13 PM
jst take the cylinder to the machien shop and fi they can get you a oversized piston to fit an over bore and new valve seals and o rings and youll be golden!
coleaclark
12-17-2008, 02:23 PM
the only thing i dont understand is that it gets really good conpression
Blown 331
12-17-2008, 02:44 PM
the only thing i dont understand is that it gets really good conpression

That just means the compression rings are sealing but the oil ring is not.
SWIGIN
12-17-2008, 02:52 PM
http://www.3wheelerworldforums.com/showthread.php?t=91286


read post #8 again
The Goat
12-17-2008, 02:59 PM
It really helps, and shows progression, if you create a single thread for your bike, and then later edit the title as needed.

You need... Wait, it's already been answered.

Other members offerring you answers won't have to look for multiple threads.
SWIGIN
12-17-2008, 03:07 PM
It really helps, and shows progression, if you create a single thread for your bike, and then later edit the title as needed.

You need... Wait, it's already been answered.

Other members offerring you answers won't have to look for multiple threads.

i think thats asking to much of him....lol
The Goat
12-17-2008, 04:25 PM
A cheaper option is to buy a pack of nicorette and put it in your gas tank... Might not stop it completely from smoking, but it certainly won't enjoy the smoking anymore.
fatcat
12-17-2008, 04:48 PM
A cheaper option is to buy a pack of nicorette and put it in your gas tank... Might not stop it completely from smoking, but it certainly won't enjoy the smoking anymore.

wow................... ^^^
Gearheadtom
12-17-2008, 05:39 PM
I had a 200m that smoked badly, but it still had very good compression. The problem I had was the rings were from a different cylinder and didn't seat right. The rings didn't wipe the oil off the cylinder wall as the piston went down. A new set of rings and honing might fix it, if the cylinder dosen't need to be bored oversized.