200x oil to head

[leevarnado]

does anyone have the pics of the mod where you tab into engine and run a tube to the head,to oil the cam.pics and mod specs would be nice.also could you do this to the lifan engin people are using on the 200x's.

[WIkid500]

I too would like to know what is done here, and how the lines are run. The only thing we need to know is doing this doesn't starve the rest of the engine of oil???

[leevarnado]

so anybody got any info yet

[hondahaulic]

The oil already gets to the head fine to lube the cam, the fittings that people are adding are usually for oil coolers.

[Louis Mielke]

There's a mod to oil the head directly by line so you can bypass the oem oiling, in thoery to fit a bigger sleave into the jug.

[leevarnado]

Louis do u or anyone you know have any pics or mod specs of this

[Louis Mielke]

Wish i did.

[greenhuman]

The standard oil gallery in the cases does not affect resleeving. The theory with the external hose was to draw the oil away from the stud that runs the oil to the head. It was more of a throw back to the ATC 90 hotups where this mod did make a difference.
Its been my experience that its not worth the trouble on a 200X

[hondahaulic]

There's a mod to oil the head directly by line so you can bypass the oem oiling, in thoery to fit a bigger sleave into the jug.

I stand corrected, I was unaware of this setup. I was thinking of the 2 fittings tapped into an oil passage in the right side case with a block-off plug between them in the passage so the fittings can be used loop the oil through an external cooler.

[Louis Mielke]

greenhuman is much most experienced with this kinda stuff. I would go with whatever he says.