200x turbo

[leevarnado]

is this real,a turbo for a 200x.http://cgi.ebay.com/ebaymotors/honda-atc-200x-turbo-charged_W0QQitemZ280292136340QQcmdZViewItemQQptZMo tors_ATV_Parts_Accessories?hash=item280292136340&_trksid=p3911.c0.m14&_trkparms=72%3A727|66%3A2|65%3A12|39%3A1|240%3A131 8

[thefox]

That thing sits up high! (look at the drive chain!!)

Sure it's a real turbo, doesn't mean it will fit without extensive mods though. I don't know my turbos very well but that one looks big to be putting on a 200cc engine.

The big hurdle is getting power to the turbo. There was one on ebay a few years ago that had rigged left side engine cover so a pulley could be mounted on the rotor and the turbo could be belt driven from it.

Didn't somebody here try turboing a 250R?

[brapp]

i had a turboed banshee a few years ago



http://w1.bikepics.com/pics/2005/04/28/bikepics-342705-800.jpg

[oscarmayer]

that turbo is too big. it came off a nissan 300z. any turbo that goes to a car is WAY too small for any motor smaller than a 850(4-stroker).

they make tiny turbos that WILL fit but as stated takes lots of custom work and tons of custom tuning. I'm planning on turboing one of the 250's i am getting. probebly the SX so it will get more grunt and such. i'll only push liek 3-4psi with capable of a maybe spike to 5psi but no more. any more can break it as the walls are weak and the seals will leak.