what hubs fit a 85 tecate??

[200x350x]

i searched and read 300ex/400ex/200x hubs fit on the tecate axle is this true?? 1985 t3:wondering :wondering

[hondawasaki]

I'm pretty sure only '84 hubs fit an '85, and vice versa.

[fabiodriven]

I'm pretty sure only '84 hubs fit an '85, and vice versa.

Yep, that's it.

[200x350x]

so no other hubs can fit to get a better wheel selection

[brapp]

dont for get the klt110 uses the same cousrse spline as the kxt and allows a 4 on 112 bolt patern or how ever far off it is with slight wheel trimmign u can get the 4 110 bolt patern wheel to fit.

[nd4speed]

I sold a set of Durablue hubs but they were the same 4/100 spacing I think. Maybe you can find some old Durablues with a different pattern.

The Honda hubs are for 86-87 T3.

[scooterroo]

84/85 t3's swap with each other, gives you a choice of 4"x4" with 84 hubs and 4x156mm with 85 hubs. you can run an 8" rim with the 4x4 hubs, and 10 rims with the 4x156mm hubs. the 86/87 t3 will swap with "worn out" 300ex, 400ex, not sure on 200x, but would say yes seeing is how the 300ex and 400ex fit the 200x. new hubs with great looking splines will not fit, way to tight, they need to be worn some to fit the axle on the t3. also, yamaha rear hubs from the banshee, blaster, warrior, and maybe a few more like raptor and yfz450 might fit.