PDA

View Full Version : Troubleshooting Question.



Jeckel
12-01-2008, 06:52 PM
Hello guys. Well this is the problem... I pull on my recoil starter and my 200 bike rolls over and hits about every other crank. It will fire up but dies 1-2sec after every time it fires like starving for gas. I hit the gas,hold,pump, but nothing helps. I half choke it full choke it nothing. it still just dies after it fires off. Ive cleaned the carb perfectly, gas line is clean, petcock is flowing good, Air filter is fresh. I have no idea what could be the problem can anyone give some tips. Also my psi is 150 i set my valves and the timing is good. Appreciate any input guys.

Gearheadtom
12-01-2008, 07:18 PM
I had the same problem with my Honda 200e, but mine was from the valves out of adjustment. I would try a new plug. I have had mine do similar things from a bad plug.