85 atc 110 wont start.help!!!!!!!!!!

[saladboy]

i just got this 110 i clean the carb,changed the gas,changed the gas lines new plug and it wont fire.check for spark and it has good spark.one thing i found that is a problem is after i pull it for a while ichecked the plug no gas it not wet or it does not smell of gas.there should be signs of gas right?what would cause this?any help would be great thanks

[saladboy]

fuel lines are clear,pet cock working good(nice flow)intake tube clear. help!!!!!!!!!!

[Mosh]

I dont know a ton about 110's.
But if your plug is dry then I would check for fuel at the carb,and then open the bowl drain and see if fuel is running out.
If you have that then look for a intake leak sucking air.

Will it fire if you put carb cleaner in the spark plug hole and put the plug in and try it?

[saladboy]

no i did that and it would not fire

[oscarmayer]

the jets can be clogged even if you think you cleaned it with carb cleaner.
go down and buy a 1gallon can of carb cem dip. take the entire carb appart and drop all parts into the basket included and let it soak for 1 hour. after take out the float and needle that went to the float. let the other parts soak for 3-4 hours, take out, wash with hot water then use carb cleaner to ginish spraying the jets and small areas. this should clean it nicely. reassemble, and vroom!

if that don't work, you got other issues such as clogged line, or way out of tune setttings.

[gravelyman]

if you sprayed carb cleaner in the intake and it still would not hit. then you either have a spark issue, intake valve issue or compression issue. even if you take the carb and tank off if you spray it it should still hit unless you have another problem. i have seen plugs that look great but would not fire properly, changed the plug and away we went.

[saladboy]

thanks for the input guys i will try them.