PDA

View Full Version : 84 200x Rebuild


leevarnado
11-16-2008, 08:54 PM
Im Getting Ready To Rebuild My 1984 200x Engine,i Want To Put Some Performance Parts In It,i Dont Want To Spend Over $600,so What Parts Should I Use.
dan440hemi
11-16-2008, 09:00 PM
look on powroll dot com
WIkid500
11-16-2008, 09:59 PM
Wiseco piston, Web cam cam shaft, and harden the rockers. Buy a carb and intake off an xr 200, and put a pipe on it. That will make it run nice and keep you in budget if you search around for parts. Powrol will not keep you in your budget.
leevarnado
11-16-2008, 10:09 PM
Wiseco piston, Web cam cam shaft, and harden the rockers. Buy a carb and intake off an xr 200, and put a pipe on it. That will make it run nice and keep you in budget if you search around for parts. Powrol will not keep you in your budget.

WHAT DO YOU MEAN BY HARDEN THE ROCKERS
WIkid500
11-16-2008, 10:25 PM
WHAT DO YOU MEAN BY HARDEN THE ROCKERS

When you run a big cam with heavier springs in the valves you create more friction. The rocker pads(part that rides on the cam lobe) are the weakest part of the link between the cam and valve, so you send them to Web cams and they hard weld them and regrind them to the right profile. This will keep them from wearing out prematurely.