Rare 84R

[1upfront]

Look at this picture and tell me what you see different on this bike.
http://i267.photobucket.com/albums/ii289/big_calo/102_2710.jpg?t=1203976304

[3 wheeler boy]

No pipe? lol It looks like it might be shortened?

[1upfront]

Other than not having a pipe, the swingers stock also.

[thefox]

Big Bore cylinder, but is it the hondaline 300 or one of the Mugan kits?

[1upfront]

It's a bigbore but its neither mugen or hondaline.

[thefox]

So did someone get a Odyssey top end to fit? Or maybe this is that mystery cylinder you have (I forget what it is).

[1upfront]

It's an odyssey 350 cylinder I found this pic on .org awhile back, they must not have been able to get the pipe to fit with those massive fins it's a tight fit already.

[motoman110]

I gotta say its a FL350 top end on it by the looks to me.

[motoman110]

Seems ya beat me too it lol

[atctim]

that cylinder looks HUGE in that bike. I picked up on the size right away!

[motoman110]

How much work is it to get the FL top end on a fooler like that? My high school has 3 brand new 350's like that just sitting there. Its basically the hole motor but the bottom end is missing a lot of stuff, counter balancers ect.. Basically everything you need to make it work for the odessey wasnt included when honda sent them way back then to the shop. They didnt want them used or made to be put back into the machines. My shop teacher made me an offer if I built a project he needs made that I could take one or two home when the year is done. But how hard is it to make it work with a fooler?

[1upfront]

Seems ya beat me too it lol

It's not mine though just a pic I found on .org.

[Twilight]

If you have access to the cylinders and heads I would like to purchase one for my NOS Odyssey

[1upfront]

How much work is it to get the FL top end on a fooler like that? My high school has 3 brand new 350's like that just sitting there. Its basically the hole motor but the bottom end is missing a lot of stuff, counter balancers ect.. Basically everything you need to make it work for the odessey wasnt included when honda sent them way back then to the shop. They didnt want them used or made to be put back into the machines. My shop teacher made me an offer if I built a project he needs made that I could take one or two home when the year is done. But how hard is it to make it work with a fooler?

Your cases have to be bored to accept the sleeve and it will bolt right on but then you'll need to stroke your crank about 4mm or take about 2mm off of the cylinder.

[JethrowMan]

i just got my cases back for the machinest for this very idea( sorry no pics yet) dose anybody know some place that strokes cranks? i really want it to be the 68mm insted of cutting down the cylinder.

[Rex Karz]

I am interested in this. I have 2 Oddy heads and cylinders.