metric bolts???

[chris200x]

Someone posted alink here one time for a site that sells the proper metric bolts to run the wheel spacers with the stock 350x rim and lugnuts. The only bolts I can find locally are grade 8 standard bolts.

can anyone help?

[Dirtcrasher]

I don't know exactly what you need, but McMaster has a huge selection of metric fastners. I get all my stainless there.......

Is it 10mm x 1.25 pitch? I know that lug studs are a finer pitch than the standard pitch that goes with that diameter

[SWIGIN]

i used 3/8'' bolts in the past but 10mm should be the right diameter.

either way just measure what you would need for length

[chris200x]

yeah swigin it's gotta be 10mm, at least 4.25 long. just not sure what the thread pitch for the tapered lugnuts are.

I've ran the standard bolts but get a terrible wobble at speed.

[SWIGIN]

10x1.25 like dirty said but they are the same thread pitch as most 10mm nuts