PDA

View Full Version : Tri-Z Swinger?


njeffery
10-30-2008, 11:36 PM
Are 1985 and 1986 Swing arms the same on Tri-Zs? They look the same but wanted to know for sure. :wondering
factoryX
10-31-2008, 02:48 AM
no and yes, but they will bolt on to either years..
Sinbad46
10-31-2008, 05:17 AM
the 86 swing-arm have some reinforcment parts on it...near where the shock link bolt on it...and i think, but i'm not sure...the bearing are different..someone else here on the board can confirm that!!
Mosh
10-31-2008, 08:59 AM
85 swingers run a larger diameter pivot bearing,bushings and seals.Fit that year only...
The 86 swinger runs smaller diameter stuff,and uses the same pivot bearings as banshee and blaster.You can use a banshee pivot bolt in either year of the tri-z.
other than that,and the added gussets on the 86,they are identical.
njeffery
10-31-2008, 12:20 PM
So a 85 will bolt up to my 86? I just need to order bearing and seals for an 85?
Mosh
10-31-2008, 06:06 PM
So a 85 will bolt up to my 86? I just need to order bearing and seals for an 85?
Yes!
You will need 2 bearings, 2 inner seals and 2 inner bushings.Expensive from the dealer...

Better yet,Just contact (X system) here on the site.He makes nylon pieces that replace all the factory garbage,and will save you money.
njeffery
10-31-2008, 10:36 PM
moshman, Thank you
njeffery
11-02-2008, 07:26 PM
"Yes!
You will need 2 bearings, 2 inner seals and 2 inner bushings.Expensive from the dealer...

Better yet,Just contact (X system) here on the site.He makes nylon pieces that replace all the factory garbage,and will save you money"

I find a X.system is that the guy?