View Full Version : 84 Honda ATC 200S muffler options....
350Kris
10-18-2008, 10:39 AM
Are there any aftermarket pipes that will fit the 200S? I ordered one from Dennis Kirk a few years ago and it didn't fit. Has anyone ordered one and mounted it with no problems? I have a high compressions piston and a K&N....thought I'd like to get a little more out the exhaust side.
Thanks,
Kris
4 wheels?
10-18-2008, 10:49 AM
Cobra makes on but it doesn't go through the center like stock. IT routes out like a big red( on the right side)
DG
http://www.dgperf.com/pages/DGproductsDetail_ATV-Sport.asp?appID=8&productID=4611
Cobra
http://www.cobrausa.com/content/index.cfm?siteaction=ATVExhaust&pg=ex&catID=2&manID=2
(the 84 big red muffler says 200es and 200x but I think it is 200s not x.)
350Kris
10-18-2008, 11:01 AM
Has anyone used the DG or Cobra?.......do they work well?.....loud?......
4 wheels?
10-18-2008, 11:36 AM
I have the Cobra, on my 200x and 200es, It is a little big louder than stock. Gives a pretty good throaty sound. Haven't used the DG but have heard it is better than the cobra.
350Kris
10-18-2008, 02:12 PM
I see neither of them have spark arrestors....
1984ATC200S
10-18-2008, 02:20 PM
i had a cobra on my 200S and hated how loud it was, and after it got too rusty i put the stock muffler off of my 200M chassis on it , i like it a lot better stockish than the cobra, seems to have more power with the stock pipe though, probly the jetting wasnt right for the cobra.
Russell 350X
10-18-2008, 02:30 PM
Cobras are good, a bit loud though. DG are better from what I have seen. Both pipes deffinely wake up the motor, with the right jetting.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.