Head......

[kilabeez0]

Now that I have your attention, i pulled my motor on my 200x and almost have the cylinder head completely off. i took the CDI cover off and the magnet thing. I also took the rocker cover off on top. My question is, do i have to take the bolt on the end of the cam off? And what about the cam chain? If I do have to take the cam bolt off, how do u do it because it spins when u try to do so?

[kilabeez0]

bump

[samster143]

Be careful because you will break the spark advancer. You nneed to do something to stop the motor from turning when you crank on the cam. On the alternator cover, remove the large cap in the middle, this will reveal the bolt that holds the flywheel on. Put a socket on this bolt and have someone hold it while you loosen the cam bolt. This has worked for me