What did you do with your trike(s) today?

[Louis Mielke]

I finished installing a new timing chain and 300ex oil pump to my 350x. Best performance upgrade you can do, refresh the worn out parts! HAHA!

Really people, if you have a 20 year old bike and have never changed the timing chain do it. It will take your bike from a typewriter to a sewing machine. She revs out so nice and quiet now. :-)

[y2kane]

Put a new carb and thumb throttle on my 185. Got it running for the first time since fall!! Trying to get everything ready to go to Michigan in May.

[Bryan Raffa]

BUILT A SHELF for the 200x and fixed the brakes on the 86...swapped some fenders .. tinkerd with the dr..all in all entirely way too mutch for my bad knee:cry:

[Saul]

Just lifted a complete 300R engine off the back of a fedex truck and into my shed!

[Bryan Raffa]

:naughty: ^^^you dont wanna know what I just lifted^^:naughty:

got all the netural and reverse lights fixed on the DR all of the wireing harness repaired..cleaned the rear lense,all I need is a new key switch and key!:w00t: What a Rats nest of wires..

and added a touch of YAMAHONDAMAN to the front forks...or as chris200x calls (Bling, Bling YO!)shens

[Saul]

:naughty: ^^^you dont wanna know what I just lifted^^:naughty:


sure I do! spill it. :naughty:

[HondaHarry]

Fired up the Tiger, just to smell some Maxima927. Mmmm. HH

[zppeacock]

Put 2 new kendas on, and a uni

[Saul]

started stripping apart my trike to pull the 250 out and get that 300 in there.

[85200xrider]

pulled the cylinder head cover back off...again because somehow my adjusting screw keeps on unscrewing itself no matter how tight i put it...any ideas????

[Saul]

http://img.photobucket.com/albums/v256/SaulAce/250R/300R/P2190428.jpg

[dcreel]

Loctite...


pulled the cylinder head cover back off...again because somehow my adjusting screw keeps on unscrewing itself no matter how tight i put it...any ideas????

[85200xrider]

Loctite...

thanks dcreel...i was going to try that but i wasnt sure if i could use it on that

[3wheelerlouie]

removed a few parts from my 200x for paint, they look good now :) ..

[pimpallic]

Pulled and dumped a bunch of crap today. So damn wet and muddy lol. :TrikesOwn

[Mackee]

Cleaned the chassis and buffed the old plastic. She is really coming along!!

[firehart]

I got them off of the lawn so I could clean up the lawn and get it ready to be mowed. Then I rode the 185s up and down the streets and around the block a few times.

[Dave's1985200X]

I fired the new Top-end this weekend and slowly breaking it in...........
Today, I am going to remove the rear axle today for a swap and put the 9 in gold rims and turf tamers on!!!
Then.............. I will continue the break-in!!! Woot!!!!! LOL

[leevarnado]

today i took the 85 200x out for a ride.found a decent steep hill,man those maxxis all tracs grip like hell.only had this bike for a couple days and been thrown twice already.

[Saul]

Put the engine in and fired it up.

[Mackee]

today i took the 85 200x out for a ride.found a decent steep hill,man those maxxis all tracs grip like hell.only had this bike for a couple days and been thrown twice already.

Looks like you had some fun. Like the pics!

[zppeacock]

Got some fresh snow last night. Took the 185s out to play. It was fun!

[1985BigRed250ES]

got more parts painted today before I ran out of primer.

[Shftatsix]

Played in the snow :)


http://i353.photobucket.com/albums/r380/shftatsix/333.jpg

[3wheelerlouie]

reselaed the exhaust on my 84 R , that DG exhaust leaks all the time :lol:

[Saul]

Finally got mine put back together and running.

http://img.photobucket.com/albums/v256/SaulAce/250R/300R/P2220418.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/300R/P2220420.jpg

[tanks350x]

I started to put on some small parts, for my build up 350X project

[Gag_Halfront]

More stripping and painting, stripping and painting. I've gotten almost the entire tecate stripped and painted. Still need to strip my lower triple clamp and paint that and my upper motor mounts, steering stem nut, bar clamps, and lower shock mounts.

I just got my clutch plates, new springs, and a new water pump seal. I should be good to go very soon.

I haven't posted much, but other than going for a ride on the 350 one day, this is pretty much all I've been working on.

[krazykane]

just WON new plastics for my t3 then i will start to rip it apart to paint and rebuild most of it .kinda of like a budget build .no trailer quenn in my shed

[The Goat]

looked at how wide my axle and hub combo is...chuckled...and went back to the couch. until all the parts are here, I'm not touching anything.

[leevarnado]

painted a header and pipe with 2000 degree primer then vht black

[riverrat]

Did a wheelie on my tri-zinger and fell over backwards.

I can take rides one float bowl at a time now.

[money89tractors]

Jumped on the beater 110 and had a friend on my war machine 200m. Raced around the yard (.80 acres) for a few hours. He couldnt get past the little 110 as we ran around obsticles. only time he even got close to me was on the longest straight away in out yard (which does up a nice hill), and by the time he got beside me we had to slow down and turn a 90 around a tree. he would have to swing wide cuz i had the inside. It was rather fun.

I'll say this, my arms were sore after racing around and working that 110 to keep ahead of the 200.

..... not to mention neither of them have brakes. lol

-Phil

[Dammit!]

Yesterday;

350x
Replaced rear carrier bearings
Replaced rear brake pads
Replaced rear brake rotor
Replaced case saver
Started trying to fix something on the exhaust pipe
Got called into work on my day off. :(

[Saul]

New sneakers for spring/summer.

http://img.photobucket.com/albums/v256/SaulAce/250R/300R/P2240421.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/300R/P2240422.jpg

[firehart]

I put a new starter rope on my old 200.

[riverrat]

Nothing, but I thought about em.

[Saul]

Put new friction discs and springs in my bottom end, adjusted the clutch, did some tuning with the needle clip, air/fuel screw and got the 300R really dialed in - runs like a raped ape - but - no fifth gear. Oh well.

[gizmo_22]

i went to dig out my roller 185 to see about getting the frame repaired and its not a roller anymore, some ass stole the new tires rims and hubs off of it! I'm getting fed up with this stuff, No one has respect for ANYTHING anymore.

[Vealmonkey]

Firehart, I'm digging the trailer, but you really need to put some atc70 wheels and tires on it at least. That would look pretty slick. Get busy man.

[oldtime3wheeler]

Put my supertrapp exhaust on my 350 and played around in the yard with the others

[Dirtcrasher]

^ You changed a whole exhaust and still didn't put the headlight and MC guard on?? :D Get on it!! :beer:

[Thorpe]

Started tearing my big red apart for some big time detailing and rebuilding... BTW... Anyone who think that silicone is a good substitute for a gasket on the bowl of the carb, come to my house, I have a whooping waiting for you... (retatd I bought my red from did this to the bowl)

[Russell 350X]

Started tearing my big red apart for some big time detailing and rebuilding... BTW... Anyone who think that silicone is a good substitute for a gasket on the bowl of the carb, come to my house, I have a whooping waiting for you... (retatd I bought my red from did this to the bowl)

I use the red silicone on mine, just in the corners to hold the gasket in place. Works great, just use a little of it.



Went riding the 350X for a few hours.

[Twilight]

Brought out the 250r, opened her up with the new jetting and silencer.. mmm speed. Cop caught me at about 55mph he said, glad I look like a kid still, told me to go home *walking it* or next time he will fine my parents and me...hehe

Took out my Pilot too, smokes bad from old crap gas, but started quick. revved a bit high, need to clean carb before the season and get it ready.

[82cutty]

I put a new rear hand brake lever and cable on the tri-moto . Also drained the old gas and freshened it up with 8 oz . of motul 800 oil and a 2 gallon mix of 100 and 93 octane gas . Man that stuff smells good :D . After I went for a good hour ride along the railroad tracks to clean her out .

[firehart]

I do have some old 90 two piece wheels and some hubs off of a US90.

[Thorpe]

I use the red silicone on mine, just in the corners to hold the gasket in place. Works great, just use a little of it.



Went riding the 350X for a few hours.

This moron used half the tube... Floats were sticking there was so much crap on the inside....

[oldtime3wheeler]

Hey Dirtcrasher, I've had the headlight and MC guards on it for over a week now. Didnt you get the pics?

[Mackee]

Installed the freshly built carb and new airbox. I had hoped she would fire right up but nothing! Just a click of the starter selenoid and nothing, dead silence. Starter didn't do crap...I now have more detective work to see why she isn't doing anything. I hate electrical issues.

[axl_rose]

Replaced a fuse and rode the 200M. Cleaned it up a bit too.

[Gearheadtom]

I had my 200m out in my mothers garden driving around in the mud, then the garden ran away. The mud liquified and ran out of the garden, I don't think my mother is happy, but I'll try to put the dirt back when it dries.

[chris200x]

I been wrenchin little by little the last few days. I washed it,,:rolleyes: changed oil and filter,,tightned chain, replaced hubs and wheels, Replaced a broken kicker, replaced the valve cover gaskets, I had to retighten every freakin nut and bolt,, heck, I even got front brakes now.:w00t:

She's just sittin here watiin to get dirty.:naughty:

[Saul]

A lil bit of riding, tuning and final jetting of the 300R. Pretty shocked by the difference in power between the 250 and the 300!! It's a HUGE jump.

Daddy likes.

[The Goat]

talked to Monsieur Jason hall yesterday about redesigning my old frame.

by wrapping certain portions and gussetting others I can change the weak points to the strongest points of the bike. all about how the force is distributed people.

also designed an airbox that should boost the hell out of the velocity/flow I'll be seeing. velocity stacks can stick it... goat design baby!

I've been drawing it out in my head the last 1000 miles or so.

ordered inverts.

chuckled at how freaking big my pegs are. a quad E barely covers half the peg!

don't suppose anyone has a destroyed aftermarket 400ex headpipe laying arond. all I need is the first 8 inches coming out of the head.

[tulsamike3434]

I sat in the barn and drank a beer and looked at my 250r thinking good times lol

[chris200x]

I sat in the barn and drank a beer and looked at my 250r thinking good times lol

LMAO!!! I've done that alot with that 200x I had a while back... :lol: :beer

[ThinktwiceZ71]

ordered my top end gaskets from honda dealer , removed air from brake lines , took clutch side case cover off engine and inspected clutch. Slight grooves need to be filed out , then i am gonna replace with oem fibers , and barnett springs. Installed new Honda clutch Cable too !

Soon soon , she will be running , wiseco piston arrives tommorow , and then cylinder and piston are off to machine shop to get bored , honed ! :beer

[MonroeMike]

Finally put the 200 engine back in the YTM frame.

[ThinktwiceZ71]

brought my cylinder and wiseco piston to the machine shop to get bored and honed , worked on my brakes , needs the rear caliper rebuilt , it leaks fluid out the side dust cover .

[outtaline]

trying to get my axle out its pissing me off I don't wanna use my BFH

[Gearheadtom]

Today I tightened the chain and changed the oil in my 200m.

[techmaster330]

Today I took out the new 200x and blasted around on it for a while

[Russell 350X]

Just got done overhaulin the Zinger. Runs good!:w00t:

[oldtime3wheeler]

Rode my 350 around the yard while the sun was shinnng.

[zppeacock]

Pulled a leaf raker behind my 185s.

[MonroeMike]

Put my grab bar, footpegs, brake and shifter levers on. Discovered my rear sprocket is bent, arrgg...

[Saul]

did some riding on the 300R.

http://www.youtube.com/watch?v=qJsZwhmNeZ0

[beets442]

Been getting 350X ready for PA. New front tire, wheel bearings, seals, chain, gears, frt.rotor, brake pads, plug, oil change, air filter and lubed cables. Took it for a ride this morning and look what jumped out in front of me!76816Beets

[Bryan Raffa]

tore down the 490 motor ...:cry: crossing my fingers on getting it fixed. also tore down a YZ250f with a bad crank;)

[Louis Mielke]

That makes me tear up Raffa.

[Bryan Raffa]

That makes me tear up Raffa.

me too... hopefully Langcourt can repair it ..http://langcourt.com/index.htm

[Bryan Raffa]

sweet there on the ball monday morning..


Hey Bryan,

The cost to repair skirt and any damage in bore and replate your cylinder is $249.95 plus shipping. Right now we are working on a five to six business day turn around. If you have any other questions feel free to contact us at

and thats with nickasil!

[Triple B!]

today I looked at my trike sitting in the shed, looking all lonely.... because I suck at starting the thing, grrrrrr......! It's got a pull start, and it seems to not co-operate with me when I wanna go go go, lol... but of course Dave [autoXer] gets a kick out of it because he can ride 'my' trike all he wants... :(

[outtaline]

I've never even done that glad I got mine runnin How many rpm where you turnin then I went over to the field and drifted around on my daughter 110 eaton mini quad that has lawn mower tires workin on lowering it so it looks like a dirt racer

[Bryan Raffa]

pulled the ice racer out, moved the forks up and swaped the link, changed the pre load,took the air box lid off,,kinda wanted to get it finnished up but the olady distracted me , so the leaky shift seal didnt get put in ..:w00t:

ready for dirt Kintore!;)

oh ya I made thoes fender mounts today ,, I had some thin chinsy ones on there and I bent them up ice racing..These are nice and Beefy!

[MonroeMike]

Worked on one of my YTM200's. Put a new chain and smaller sprocket on the front. Got the rear brake pedal hooked back up. Cobbed a return spring mount, since I left the dust cover off.

Went for a ride on my 185 with Harryredtrike (sort of). I couldn't keep up with his 200x, so I pretty much had to follow the dust cloud. :D

[harryredtrike]

here are my new scott grips,put on today

[1984ATC200S]

Rode the 200S though hell and back, never missed a beat, the same cant be said for the 08 4x4 I was with!

[harryredtrike]

hey 1984 200s,is there still snow up there:lol:

[1984ATC200S]

hey 1984 200s,is there still snow up there:lol:

Eh! none of that, but actually there still is :rolleyes:

[Mr. Clean]

Got the exhasut pipe high temp coated on my 86Rr project.

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_0937.jpg

[Saul]

Ohhhhh that looks so nice, clean, NEW!

Great job man.

[Gearheadtom]

Eh! none of that, but actually there still is :rolleyes:

I was out on some trails today out in Ripples, and there was no snow. I came up to one mud/water hole that a big 4 wheeler (I'm gusseing 4 wheel drive) had turned around and never went through, but I drove through and never spun a wheel.

[harryredtrike]

well not alot,just washed it and rode across the street to monroemikes,feel like edog<garage queen>trails still too muddy for me:w00t:

[Thorpe]

Pulled the BR out and did a few standup wheelies on it... Kinda scary, since the new plastic isnt here yet, and all I am riding is a gas tank and seat pan!

[Dave's1985200X]

I put the new carb on the 200X today!!!! Found it on ebay for 5 bucks!! Brand new Kinhin Japenese carb. It was set up for auto choke and i didn't pick up on it. Believe it or not, I was able to swap the lever assemblies from the old to the new and it worked like a charm.........................purrrrs like a kitten!!! YEAH!!!

[MonroeMike]

Picked up a different front end for my Honda today. Going for a softer ride.

[harryredtrike]

just call your honda mechanic when your ready to install:shiftyeyes:

[aaron7]

Thought about mine again, and how I'd love to be riding it right now. Someday...

[tanks350x]

Just got finished bumping the jet sizes up, on the main and pilot. Went up one full size on each

[bonkers_200s]

I did this

I was going up im going to guess around a 70 degree hill, damn near sitting on the gas tank and accidently hit the kill switch. Down I went.

Trike is ok, landed on its tires, but broke the fishing pole that was bungee corded to the grab bar:(

[ThinktwiceZ71]

changed oil in my 350x :beer

[Bryan Raffa]

new shift shaft seal,clutch cover gasket, clutch adjusted, inspected sprocks basket again to make shure no more dammage was done, Fluid change.

[Bryan Raffa]

good buddy of mine gave me a red triz shell at tf 08 when he left.. thanks BUDDY!.....got that ratted thing all blinged up now with new bulbs and lenses..Sanding plastic sucks!:lol:

OH YEA.. put the STOCK carb back On! took that PJ and SMASHED IT... with a sledge!!:twisted:

Dam thing Idles like a dream now!!:w00t:

[the great gazoo]

Freakin awesome, BR! What ever happened to the 200X?

[harryredtrike]

put on my new DG pipe,sounds good,looks good awsome.ill edit pics in later

[Bryan Raffa]

Freakin awesome, BR! What ever happened to the 200X?

still got it .. collecting parts s l o w l y . . . . . . .

[pmitch82]

im still trying to get my 81 klt 200 running right............. so its just sitting

[atctim]

On the 450 - changed spark plug. Un-stuck the Hot Start jigger - was seized in the carb. Replaced the kick starter with a brand new one - YIPEEE!! - no more duck tape holding the kicker in :) Got a broken easy out out of a broken bolt - then continued to drill out the broken bolt - replaced the bolt with a thru bolt and nut on a broken foot peg bolt. Then I rode it a bit - and the foot peg bolts loosened up after only about 10 minutes - UGGG!!! Frustration set it so I moved on.

So I went to work on the ATC110 Beer Wagon. Finished welding it up - now just needs a paint job and it is done!

[coldfuzion76]

Ordered my first batch of parts yesterday to get her goin, so I stripped her down a little, pressure washed and did some touch-up paint. Nothing too crazy, but it's a start!

[harryredtrike]

well i was off work today,so i made the most of it.i did a little to two of my trikes.i finally used the wheels howdy sold me and the spacers i bought earlier.and a picture of the exhaust i put on my 200x i promised.well here it is.the 185s is now 5inches wider and also put on new tires.

[oldtime3wheeler]

Did the once over on the Big Red and 350x for tomorrows ride. Decided to beat on the x alittle more tomorrow. I will let the Bog Red sit out another ride. Should be a nice muddy day.:w00t:

[Yamada]

Last night I put the wiring harness back on the 225DX and removed the rear tires (Zipper), put a old set of Kenda dirt dog. rattle can the swing arm skid plate. Today I put the skid plate on it, that it's.

[hellsingyan7]

Well, a few days ago i decided it was time to pull my '83 YT175 tri moto out of the weeds. I aired up the tires and tried like none other to get it running but it wouldnt fire. So i tore the carb off and gave it a cleaning from hell. While i had the carb off I got an incline and removed the head. Now Im sending it out to get bored .060 over and port and polished. Rekindling an old flame. I miss my trike. Glad I got it back.

[harryredtrike]

Well, a few days ago i decided it was time to pull my '83 YT175 tri moto out of the weeds. I aired up the tires and tried like none other to get it running but it wouldnt fire. So i tore the carb off and gave it a cleaning from hell. While i had the carb off I got an incline and removed the head. Now Im sending it out to get bored .060 over and port and polished. Rekindling an old flame. I miss my trike. Glad I got it back.

cool hope everything goes well for ya,you should take a before and after pic.we love pics.welcome to 3ww.any problems let us know.:welcome:

[harryredtrike]

today had to clean the inside of my front brake drum.the brake return was sticking and not releasing the brakes.actually surprised how nice it was inside,for 28 years old.all back together and works like a charm.

[mahackney42]

Rode some semi-local trails in Fairchance, PA. Hopefully the rain has stopped for a while.

http://i611.photobucket.com/albums/tt193/mahackney42/IMG_0081.jpg

Mark

[Rawlins350x]

Been doing a rebuild on the 350. touched up the frame, new boots, air cleaner, brakes, motor is getting fresh set of rings. I just got the gas tank back from my neighbor today. It came out beautiful and looks like its glowing:Bounce Have a new OEM fender coming (should be here monday :) ) Also added a 70 to the collection.

not the best pic... http://i612.photobucket.com/albums/tt205/floodcitypunk/trike.jpgCan't wait to ride!

[vbb71zoso]

Getting ready to do some pre-mother's day planting, I went nuts and started pulling the evergreens out. Now I gave my wife another reason to let me get more "garden tools".

http://i201.photobucket.com/albums/aa169/vincentbucy/Mothersday2009001.jpg

http://i201.photobucket.com/albums/aa169/vincentbucy/Mothersday2009002.jpg

http://i201.photobucket.com/albums/aa169/vincentbucy/Mothersday2009007.jpg

[Saul]

More parts arrived. I keep stockpiling until I have time to install them!

[Daddio]

This weekend I installed all of the parts on my 70 that I've been stockpiling. It started on the fifth pull and runs like a top. :w00t:

[Saul]

This weekend I installed all of the parts on my 70 that I've been stockpiling. It started on the fifth pull and runs like a top. :w00t:

Thats great news. She's headed to trikefest right?

[Daddio]

Thats great news. She's headed to trikefest right?

Yes! I'm hoping for some nice weather this weekend so I can get a few hours on it to see how it will perform.:naughty:

[Saul]

Yes! I'm hoping for some nice weather this weekend so I can get a few hours on it to see how it will perform.:naughty:

I'm guessing, like everything else you guys build, it will rip! :naughty:

[outtaline]

adjusted clutch rejetted carb and for some reason its more fun to ride
GET IT RAAAAAAAAAAAAAAAGGGGGGGGGGGGGGG!!!!!!!!!!!!!!!!!!! !

[daniel_250r]

filled the 200s with really old motor oil sitting around and rode it 4th gear pinned for about a half hour then went mud bogging and drowned it twice in waist deep water

[dcreel]

Put the new pipe on the Tecate.. Rode it and the 200x in the backyard.

[Russell 350X]

Washed the Tri-Z....

[Mr.Atc]

i did a redneck seat job to my 200m with camoflauge duct tape

[3podd]

pick up a 83-250r for my bro which is freaking crazy cool!(scary a bit not used to the 3 wheel thing yet) and put new DG exhaust, grips and (started recovering my seat and figured out i had no stapler ooops) then i :Bounce rode!!

[KASEY]

i started on another duner,,, this one will be different,,, ultra light sexy 330r,,,
http://i39.tinypic.com/qqsx9f.jpg

[somekidwithanm4]

I took off the exaust, took off the guards, bought some Evapo Rust for them, stuck them in it. Then i took off the old engine, installed a new one, rewired it, and took off the tires. I'm gonna soak them in Evapo Rust too, then reprime and repaint.

[Mr. Clean]

Installed new shoes all the way around on the resto project:

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1049.jpg

[theiizz08]

Took my daughter out on it,her first time SHE LOVED IT:Bounce

[KASEY]

dammmm mike the resto looks great!!! got a little time this morning,,, the subframe is almost done,, i have a couple of brackets to build for the silencer and the aircleaner,, then its will be done,,, it saved a little weight from the stock one,,, but without an airbox and a few other things that bolt to the old one it will be quite a bit lighter..
http://i40.tinypic.com/2uyonlf.jpg
http://i43.tinypic.com/33y2opl.jpg

[edog]

I sold my 250R.

[tanks350x]

I sold my 250R.

I'm not buying it!!shens shens shens shens shens shens shens shens shens shens shens shens :crazy: :crazy:

[edog]

I'm not buying it!!shens shens shens shens shens shens shens shens shens shens shens shens :crazy: :crazy:

Yes I did, to a guy in Newbruswick. He drived 5 hour to come and get it. And he happily gave me what I wanted for it. I bought a 1987 Monte Carlo SS Aerocoupe with the money.

[outtaline]

AGAIN?:confused:

[edog]

AGAIN?:confused:

Yep, i'm that good.lol

[outtaline]

rode trails for about 3 hours chasin 450 quads then played in some nasty swamp mud jumped in the lake to clean up then came home finally got to play all day with no bitchen oh yeah got a warning for riding it at the car wash when we stopped to clean them up the cop was such a trailpro all we did was ride from the trailer to the stall and he pulled in the lot lights flashin and sirens goin screamin at us and we never went over idle speed

[harryredtrike]

gave her a bath today,after some muddy riding a couple of days ago

[mahackney42]

Just got back from a weekend ride on the Hatfield McCoy Trails. Three of us rode the Little Coal River section and covered about 60 miles. Some sections were very muddy but the weather was beautiful. I wasn't sure about keeping the Kenda Bear Claws on the 250R that I recently picked up, but they were exactly the right tire for the wide range of conditions faced on this ride. Not one mechanical issue the whole trip. I was the only trike and I didn't see another one all weekend. Yamaha had a demo ride set up at the trail head and we got to try several of their new quads out on the trails. Overall, a great trip.

http://i611.photobucket.com/albums/tt193/mahackney42/CIMG1948.jpg

http://i611.photobucket.com/albums/tt193/mahackney42/CIMG1953.jpg

http://i611.photobucket.com/albums/tt193/mahackney42/CIMG1958.jpg

Mark

[harryredtrike]

hope you taught those quads a lesson

[mahackney42]

hope you taught those quads a lesson

Definitely did. I spent a lot of time waiting at the next fork for them to catch up. One of the coolest things about owning a trike is that everyone else thinks its great...but no one wants to ride it.

Mark

[harryredtrike]

Definitely did. I spent a lot of time waiting at the next fork for them to catch up. One of the coolest things about owning a trike is that everyone else thinks its great...but no one wants to ride it.

Mark

good we'll keep them for us,they dont know what they are missing.

[fabiodriven]

I pulled the old 110 out today. I was prepping it for a little scouting mission I'm going on tomorrow. Fired 'er up, took 'er for a spin, then found a fuel leak around the seam of the float bowl. I pulled the carb off to fix it and in the process I figured out the carb spacer between the carb and intake was on upside-down. Oops! I've always had an issue with trying to git 'er to idle right, just figured it was the Supertrapp and maybe the jetting being a little off. So I put it back together right this time, put some nice synthetic 15w40 Torco in 'er and she's all better!:w00t:

[old-yellow]

Took the trimoto on a six hour ride in Monticello today and manged to roll it over twice and bent the handle bars also broke the rear plastic and got it stuck in the mud about five times, but overall I had a good ride.

Alex

[NewfieBish]

mahackney, how did ya find the trike on gas over your whole run that day?

[lookinforone]

well today i found a perfect thing for a choke cable
http://www.supermotors.net/getfile/735888/fullsize/dsc_1759.jpg
got it mounted up
http://www.supermotors.net/getfile/735889/fullsize/dsc_1760.jpg
and got rid of the premix tank and what not.
http://www.supermotors.net/getfile/735890/fullsize/dsc_1764.jpg

[dcreel]

I bought a blem asv clutch lever and mount for cheap from asvinventions on ebay for my tecate. The mount fits the stock perch, but the lever won't. However I am in the middle of remedying that with an air grinder.. We'll see how it works out. Turns out it works really well. The asv clutch lever feels awesome. It fits your hand perfectly. I lost the bid at $10.50 for the F3 brake lever in blue.

Edit: Pics
http://i176.photobucket.com/albums/w182/dcreel/asv002.jpg
http://i176.photobucket.com/albums/w182/dcreel/asv004.jpg
http://i176.photobucket.com/albums/w182/dcreel/asv003.jpg
http://i176.photobucket.com/albums/w182/dcreel/asv006.jpg

[Orangecnty250r]

Work on the cagiva today as I have a 2 week deadline starting 6/1/09 to get it a roller (Raffa). This one is a tough one.... much more work than I thought and I NOW remember why it was moved to the back of the shop and I did "other" things. When I bought it it was in mostly in pieces. The seller also collected ALL kinds of cagiva mx parts and I got them handed to me in boxes as well. Like putting together a puzzle I never took apart in the first place. But Raffa i'm on my way!!!!!!

[Bryan Raffa]

Work on the cagiva today as I have a 2 week deadline starting 6/1/09 to get it a roller (Raffa). This one is a tough one.... much more work than I thought and I NOW remember why it was moved to the back of the shop and I did "other" things. When I bought it it was in mostly in pieces. The seller also collected ALL kinds of cagiva mx parts and I got them handed to me in boxes as well. Like putting together a puzzle I never took apart in the first place. But Raffa i'm on my way!!!!!!


:shiftyeyes:


:w00t: :beer YOU CAN DO IT!!:lol:

[mahackney42]

mahackney, how did ya find the trike on gas over your whole run that day?

The 250R used 2.5 tanks of gas during the outing. My 08 Z400 and a Polaris 4x4 used a little more than 1 tank, but I rode the R like I was on the last day of Baja 1000 and the other guys just cruised.

Mark

[gutterworks129]

Well I painted an engine for my 85 Tri-Z that I'm restoring. Hope to get it in the frame this week. Forks and triple clamps are ready for install. Frame has been powder coated for ever waiting for the heart to be installed haha!http://i578.photobucket.com/albums/ss227/gutterworks129/threewheeler038.jpg

[Somekindofjerk]

got some riding in out behind the house and up the road... nothing special.

[NewfieBish]

haha sweet.. thats not as bad as i thought, mine burns alot of gas

[gutterworks129]

Here is the engine I painted and got ready to put in the frame, can't wait! http://i578.photobucket.com/albums/ss227/gutterworks129/Tri-Z095.jpg

[somekidwithanm4]

Well not much today. Bought a carb rebuild kit and a new shifter pedal. Compression started my neighbors Honda XL250r dirt bike after 12 years of sitting and then got it to idle.

[Bryan Raffa]

gutterworks.. what color yellow did you use? looks a little brighter than stock..I like it!

[gutterworks129]

Safety Yellow my friend, it had to grow me, that's what I got! It goes well with stock plastics.http://i578.photobucket.com/albums/ss227/gutterworks129/Tri-Z044.jpg

[Louis Mielke]

Thats one nice looking Z gutterworks

[Sargon2112]

Took the rear caliper off my 350X. Soaking it overnight, rebuilding it tomorrow.

Also took the front fender, rear flaps and side covers off the DX and removed the old, dried out camo tape. Cleaned them up, waiting on the new stuff to get here this week. Will post pics of the re-camoed DX by the weekend!

Cheers!

[somekidwithanm4]

Took apart my spare non running U.S. 90 engine only to discover it needs a new camshaft, piston ring and i found out the reason it wouldn't run. The exaust valve is rusted shut and the screw is broken off!!!!!! Wow. What a peice.

[scottp597]

Took off cylinder, cleaned carbon deposits. Inspected exhaust or lack of bolts... haha. Soaking carb parts, inspected reed assembly. This is the first engine tear down since I bought it. Will probably replace rings, put in boyeseen carbon reeds (on order), will check timing and tune carb. This gives it a fresh start for my summer of riding. I need to look into the coolant in the gear oil issue also, not sure if it is the pump seal and how to change that. Hopefully I can do it without splitting the case.

[fabiodriven]

Split the cases and ordered parts for the never ending Tecate 500 project. She's under way again!

[Mr. Clean]

Added the OEM decal kits and OEM grips.

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1083.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1082.jpg

Got my last parts back from the blaster (the exhaust system is Dammits, and the hub is for a douglas 10" rim) and had the skid plate glass beaded.

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1080.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1081.jpg

[Yamada]

Yesterday I ordered 2 new rear tires, Kenda Klaw XCR 22x11-9. Should have them by the end of the week.
Today I ordered somes parts at the Yamaha dealer.
Oil filter
Air filter
rear brake lever
blaster taillight
wheels nuts

[Gearheadtom]

Today I had my 200m out in a gravel pit, and went through some of the smaller mud holes. I then went to another near by pit and tried one hole which looked like it had a solid bottom. I got stuck, and decided that I didn't want to get my boots wet, and the bottom was only sand, so I took them off. I waded in barefoot and pushed while holding a bit on the gas. One rear tire spun over my foot and badly scratched my toes.
So here I set, at home, barefoot, with Polisporn(sp?) on my toes.

[beets442]

Went riding Sat., neighbor has about 6 cats minus 1. High speed contact. Don't have pics but it wasn't pretty..... Beets

[daniel_250r]

stripped the big red down, lots to do!

[lookinforone]

i rode mine.
it sure does got some pep for being over 25 years old.

[outtaline]

Walked past kicked the tires and said some 4 letter words.:cry:

[Saul]

today I learned that a 14 tooth front sprocket + a 35 tooth rear sprocket + a 300R = stupid fast top end.

[Lukeatc185]

today i pulled the front wheel off, took the handle bars off, threw the whole bike into the back of the station wagon. and off north i went to my 2nd cousins, hes an ATV dirt bike mechanic. getting the flywheel and crank shaft bearings replaced. and an overall tune up and clean up. ill have it back next weekend. the engine is comming out, and being painted white, all easily removable caps will be painted chrome blue. handlebards will be chrome blue same with the gas tank and rims, rest of the frame and fenders are going white. will have pics of 185s custom rear suspension this weekend.

[ThinktwiceZ71]

rode my 350x in the mud/ rain today , man was it a blast lol but i was soaked to the bone ! :beer

[The Goat]

organized all the parts in the shop into three piles...things that need to be shipped, things that are needed for the build, and things that I have no idea why I purchased and need to sell.

I have HUNDREDS of tiny little honda baggies lying around...no clue what they are for. lol

[Bryan Raffa]

finally figured out why my break pedel was so high.... never changed the banshee end on the master cylinder!!! DOH!!! NICE NOW! even put the dam spring on..:)

[oldtime3wheeler]

Used my BR and 110 to haul stone around the yard with my yard trailers. Its easy to get the kids to do yard work that way.

[code200k]

put some renthal's on the ytm looks preety good still waiting to get the car outta my garage to finish the build

[hawaiirider]

i asked my dad if he had started it at all in the past year ive been away from it he said no!?

[posty2100]

went riding tonight.....took out the 200s and my brother rode my rancher....rode about 20 miles around trails and dirt roads...200s ran decent but when I came home I took the carb off and cleaned it...I have never messed with carbs and now I am prowd of myself for cleaning it right cuz now it idles perfect and dont have to use the gas to start it heres some pics to add cuz I have how nice pictures are to see...200s alittle muddy and not a good picture in garage

[brapp]

ok this mornign so far i fixe dmy pretty 350x exhaust problem by modifining the stock 450 headpipe to conect to the 350x headpipe and used the stock 45r silencer and started to spot weld the pin hole sin my cheap dg headpipe that has a few rust hole sin it on my water pumper r

[Twizted]

replaced rear axle bearings and seals today and serviced the brakes. rides great! no more knocking in the rear with new bearings...lol

[oldschool521]

Drained the watery oil out of my tri-z today. Also ordered new water pump seal.

[Saul]

Some more mods for the 300R Airfooler ... +4 westcoast, Numberplate, new bottom end, 35 tooth rear sprocket, 12 tooth front and other misc stuff.

http://img.photobucket.com/albums/v256/SaulAce/250R/lucky13/IMG_1934.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/lucky13/IMG_1935.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/lucky13/IMG_1936.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/lucky13/IMG_1937.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/lucky13/IMG_1939.jpg

http://img.photobucket.com/albums/v256/SaulAce/250R/lucky13/IMG_1943.jpg

[dcreel]

Saul, Your 300r is looking great.. Keep it up, love the swingarm.

[Dammit!]

With all the time and money you've invested in that bike, I can't believe you have the silencer hanging on with some wire. :lol:

Today I rearranged the trikes in the garage so I could have room to work on the 85 R. After taking a close look at it I realized the frame is bent more than I want to deal with so I'll be picking up a different frame soon. Then it's off to the powdercoater and let the slow accumulation of parts begin! :lol:

I might have scored a sweet discontinued NOS part the other day too. I won't be convinced until it actually shows up though. Got screwed out of a Wax-On desert seat for it on ebay last week. Won the auction but seller refuses to ship because he was too stupid to use a reserve.

[Saul]

Saul, Your 300r is looking great.. Keep it up, love the swingarm.

Thank you very much. I appreciate it. :)

[gutterworks129]

Well I got the forks, triple clamps, front wheel on and the motor in and cleaned a carb I got off ebay. I sand blasted the stock swig arm and bearing carrier. Oh also painted them and need to get the rear shock ready for install. I cleaned up the gas tank and painted the mounting bracket. I need to get the front wheel powder coated black. I'm also been working on a 88250R as well.http://i578.photobucket.com/albums/ss227/gutterworks129/Tri-Z100.jpghttp://i578.photobucket.com/albums/ss227/gutterworks129/Tri-Z096.jpg

[Harold]

Today I picked up some parts at the Honda dealer so I can put the sub tranny back together on our 1980 110 ATC this weekend. Earlier this winter the low speed gear broke its' flange and the cover. I'm just getting in the parts now. We got the 110 at a local pawn shop, and the previous owner didn't put in the ball bearing that goes on the shaft and sits in the cover that the low speed gear is on.

We also just got a 1984 200 Big Red off of ebay a couple weeks ago. The CDI held on just long enough for us to see it run three times before dying off. The dealership is doing a carb rebuild and service for us and it should be done early next week. I have three new GBC Dirt Devil II's sitting in the barn to replace the bald knobbies.

We'll be ready and willing for TF2010. I'm saving several vacation days so we can join in next year.

[Rookie]

Finally rebuilt the forks on the 200x. I had the parts for a few months and was gonna do it before going to TF ( Plans changed, couldn't go ) but I couldn't find the parts :wondering . I looked everywhere except where they were at, under the computer desk in the box right were I put them :lol: Anywho their done :w00t: .

[brapp]

2 words (500 TECATE 3)

[SYKO]

I only see one word and a bunch of numbers.

[steven 250sx]

took the tecate apart it is waiting on a new headgasket that will be in monday

[oldschool521]

Put in new water seal and after fighting what I thought was a carb problem found that my stock silencer was plugged up. running much better now. Now back to smokin 400ex's.

[lookinforone]

took the front wheel off and cleaned up the rust from the inside
http://www.supermotors.net/getfile/741455/fullsize/070109095000.jpg

and painted it black.
http://www.supermotors.net/getfile/741456/fullsize/070209132200.jpg

and got the new tire mounted up.
have a pic of that tomorrow.

[lookinforone]

went for a ride friday
http://www.supermotors.net/getfile/741997/fullsize/dsc_1964.jpg
http://www.supermotors.net/getfile/741998/fullsize/dsc_1974.jpg

[Macs]

I spent yet another day beating the piss out of my swingarm bolt. Got the engine out of the frame and about 1" of swingarm bolt hanging out of each side of the cases. Put in a vice, heated, penetrated. still hasnt budged. Now i have dipped that part of the engine in pb blaster and will leave it that way overnight.

[brapp]

i changed front tire/ rim on my 85 250r so its a nice runner again

[DC SUPERJET]

on my 86 200s I did the following:
Cleaned the carb
installed new 10 tooth front sprocket
installed new chain
changed the oil
adjusted the fuel screw
fouled another spark plug
came on this website to try and figure out why I keep fouling plugs

hopefully I can fix it and use it for what I got it for, to pull jet skis up the beach

[outtaline]

This is what I did but no trikes allowed. www.redneckyachtclubfl.com
Had to get out the Grizzly 660 with 29.5 OUTLAWS

[harryredtrike]

getting ready to head up north next month and ride the state trails in grayling, michigan.had to do a few things to get legal.put on spark arrestors and orv licenses,along with new ngk plugs.first pic is the 185s,next is the 200x,and last is my kids quad.in michigan you have to be 16yrs old to ride a three wheeler,thats why there is a quad.

[somekidwithanm4]

Lol that sucks for michigan folk. Anyways i painted the footpegs, primed the skid plate and started sanding the rusted exaust system
79415
79416
79417

[JasonB]

I thought about how cool it would be if my 300R wasnt an hour away so i could ride it. Does that count :D

[Saul]

I thought about how cool it would be if my 300R wasnt an hour away so i could ride it. Does that count :D

got any vids of the beast? :confused:

[lookinforone]

it was a sad day today. i sold my trike. :(

[1985BigRed250ES]

I got the chain put on mine and put about 5 miles on it today.

[vbb71zoso]

Well, two weeks ago I destoryed my Pride and Joy 84 atc. I love that bike. I took it to Bear Creek here in Ohio and that stupid hill was calling me from the moment I put eyes on it. It was like I was 15 years old again. Well, I made it to the top. At least as far as you could go and call it the top. My front wheel was on flat land. Just then the bike got going a little left on me. Needless to say, there it went bouncing down the 250 foot hill. At times it was bouncing at least 10 feet in the air. When all was said and done, the bike looked pretty well. A few minutes later I was to find out that the frame was bent to hell and the rear axle was like 25 degrees off midline of the bike. To make a long story short, I went home and got on craigs list. Got a complete parts bike (82 185s) in a few hours. I just finished today a parts transfer from my 200 to this 185 frame. It is about 2" shorter, but for $50 and about 8 hours, it runs like new. I can't wait to ride again, this time I am sticking to the trails! Here are some pics of the 200 to 185 transfer!

http://i201.photobucket.com/albums/aa169/vincentbucy/cb350engine005.jpg
http://i201.photobucket.com/albums/aa169/vincentbucy/cb350engine006.jpg
http://i201.photobucket.com/albums/aa169/vincentbucy/cb350engine009.jpg
http://i201.photobucket.com/albums/aa169/vincentbucy/cb350engine007.jpg

[FourtyCaliber]

Well, yesterday and today, I just stood and stared at mine cause, like a dumba**, I unclogged its slow jet with a drill bit and, in doing so, enlarged it and then it ran rich and the dumba** owner had to go and order a new one, which won't be in until Wednesday, and so until then, it's all ripped apart, just sitting there, wondering why it just has to sit there, not being run, wondering why an idiot drilled out its jet without first trying to come up with a better method that wouldn't damage it and then make the trike sad and cry uncontrollably.

[posty2100]

took plastics and seat off my tecate and cleaned the whole bike good. My brother fliped it the other day and broke one side of the rear plastics and the metal rod that goes under the plastics for support. So today I welded the rod back together and riveted the plastic back together. It turned out good. They are the original plastics from 86' and I bought this trike this week off the original owner. Love this thing and I am addicted to 3WW.

..........Ill have pics when its daytime and the weathers better. I know how much everyone likes pictures.

[Gearheadtom]

Today I had my 200m out on my parents woodlot. I was out to a gravel pit and drove up some of the big hills, and I even saw a deer. When I came back from that drive, I decided to take my brother for a little drive around. We noticed a spot of bear crap in one spot, and then when I turned, something made a noise in the back of my trike, and immidiatly thought "bear", luckily we were getting ready to leave, because after that every noise or shape was a bear, and that put an end to my riding.

[Thorpe]

Spent 4 bucks at the do it yourself carwash, trying to get the previous owners POS Kreem job out of the tank....

[gutterworks129]

I helped Tri-Z 700 change the oil and instill his new DG exhaust system on his Tri-Z. I also cleaned and painted radiators and brackets.

[tanks350x]

took the X over DC's house and did a compression test on it,,, came up with 192psi:naughty:

[Yamada]

Replaced the front wheel bearings on the 225DX.

[oldtime3wheeler]

Raced my atc 70 against my buddy on my trx 70 in my yard. Nothing like good old Friday night backyard racing.
Got the big red out of the shed to do yard work yesterday. Hauled the manure trailer from behind the paddock. Then hauled the neighbors trailer back behind the paddock to load it with dirt for him to use at his house.

[Lukeatc185]

i replaced my front wheel bearings and seals on the 93 YTM 225. when i finished a HUGE storm rolled in, heavy rain and lightning. me being in a subdivision in a city. its not legal so i like big storms no 1 ever cares if i bust it out during bad weather. but if i bring it out on a nice day ill have police here in a matter of mins. but anywho i was probably out for about 30 mins. and my plug fouled up real bad i stalled out and had to push it home 15 mins in the pounding rain lol

[posty2100]

today I worked on my 200s and T3 since they both werent running and the weather sucks

Took the carb off the 200s and clean it and put it back together and everytime I turned the gas on it would just run out the overflow. So I thought it was the needle or the float so I took it apart and they looked fine so I put it back together and same thing. So then I noticed I had the fuel line coming in the breather instead of the right way. So fixed that and put it back together and is fine now. Dumnnnasss me didnt put it back together right.

The other day I couldnt get my 86' tecate to start, kicked and kicked then tried poping it and nothing. I figuted it was flooded so I took spark plug off and sanded it and still nothing. So I took the carb off and cleaned it and found that the main jet was plugged. So that wasnt a bad fix. Now starts 1-2 kicks all the time like it should so I took her for a rip before it started raining. Then I replaced the twist throttle grip and put new rear brakes on it so its all set to go.

So now im happy I got both running good and had a good little ride.

Pic is from last week when I painted the exhaust.

[Mr. Clean]

Epoxy primed and high temp coated Dammit's OEM exhaust and refinished the heat shield mounting hardware.


http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1551.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1554.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1556.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1563.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1564.jpg

http://i280.photobucket.com/albums/kk179/miked1957_photo/DSC_1565.jpg

[racerxxx]

Prepping for the 200X front fork rebuild/ conversion on my 250SX. Beadblasted and powdercoated the upper triple clamp tonight. Previous nites I mounted a new 23.5X8-11 front tire, 2 new 20X10-9 rear tires on 400EX rims. Parts for the fork rebuild just shipped, all new seals, bushing's, piston ring, wiper, fork boots. All new plastics shipped for the SX as well, white 86 250R front fender, White 250SX rear fenders with new mud flaps. Obviously got Pro-Taper SE bars, Pro-Taper grips. Still need to order a PRM rear grab bar, Straighten out the tank and paint it, bead blast the lower tripple clamp and powder that and save up to have the seat recovered. CAN'T WAIT!:D

[inv3ctiv3]

I got my ATC 70 running and rode it around....decided I am not so sure I want it :wondering

I sanded down and primered my 200x tank!

[MonroeMike]

Cleaned a Mikuni carb. Shot the air/fuel screw spring across the garage (that's lost forever...).

[UlsterATCFan]

I got my ATC 70 running and rode it around....decided I am not so sure I want it :wondering

I sanded down and primered my 200x tank!

Blasphemy! Why would anyone not want a 70 given how much fun they are!!? :banned:

[inv3ctiv3]

Blasphemy! Why would anyone not want a 70 given how much fun they are!!? :banned:

I dunno, I live in a city and don't really have a place to ride it.....it just wasn't that fun for me. If I had a bigger area to ride I am sure I could enjoy it but I rather sell it and use the money for my other 200x.

[zppeacock]

I washed all my trikes today

[tulsamike3434]

Nothing I have to FREAKING work tomorrow!

[trike moto]

built new foot pegs for my 225 today they are great

[oldtime3wheeler]

Finally got my 350x back together the other day. New clutch, pivot bearings and carrier bearings. Just have to put the new progressive fork springs in and Im ready. Worked on my KLT110, put some slime in the tires to see if they would hold air. Worked somewhat, but I think I need more.

[SYKO]

I had to mow... so I pushed the 500 out of the way to get the lawnmower out.... much fun.

[K87_250ES]

Finally got to ride the 250SX that I picked up this past Saturday.
Went to a buddy's house where they just got through shelling corn. Big open field cruising along in 5th when it just started to slow down and then stopped, engine was idling. Dropped to 1st and hit the throttle... nothing. took a few min but we finally found a corn stalk wedged in the brake lever. Pulled out and rode on.
Riding is a great stress reliever after a busy Monday!!!

K87

[harryredtrike]

had to give a bath to the girls,still filthy from last week at bundy hill mi.put new did chain on 250r too.

[350Xccelerator]

Took off some parts to take them to get PCed tomorow.

[RudeDog666]

Looked at BR sitting there with the "over flowing with fuel carb " problem.

Went out back by the fence and started up the 125 and messed around doing donuts and wheelies in my 1/4 acre yard trying not to tear up the lawn too much.

Then I went out to Menards to get a price on some siding for my uncompleted shed, which will be home to the trikes when it's done. I saw Goof~Off and decided to give it a shot at taking off the over spray on the 125 plastics. It worked GREAT!

[Thorpe]

Put my decals on!

[inv3ctiv3]

I put in a new headgasket on my 200x motor and put it all back together, gonna put it back in the trike later this week.

[code200k]

^^^ 200z??

[Side Wayz]

well im not home withmy baby so Ill let you know 2 morrow. But I did see a nice 250 r for sale but wont have the lot til Sat. so if he still has it ill be coming back tru Ohio and hitting up Michigan then bac to Jersey

[inv3ctiv3]

^^^ 200z??

Ha sorry meant 200x

[oldskool83]

i looked at a stock 200x swingarm skid plate laying on the garage floor haha.

[inv3ctiv3]

i looked at a stock 200x swingarm skid plate laying on the garage floor haha.

You wouldn't want to get rid of that swing arm skidplate would you :naughty:

[oldskool83]

honestly i would like to!!!!!!!! its yours if ya pm me an offer

[Jonpin]

Well last night changed the rear end fluid in the 250es and then adjusted the clutch and then rebuilt the kicker it was nasty feels like new now oh and adjusted the rear brakes . wiped down the 200x roller and strightend out a little tab on the engine skid pan and made sure the rear brakes where functional and they where. pulled tons of spider webs off it it was loaded with widows from the ladys barn i got it from,and cleaned the chain guide it was a grease ball.

[fabiodriven]

Brought the new KLT with me to work just to putt around on here and there.

[inv3ctiv3]

Sold my ATC 70 and moved my trikes around to prepare the 200x to get the motor back in and put back together

[Bryan Raffa]

Absolutey nothing...:(

[inv3ctiv3]

I just put the motor back in my 200x, started up first kick :) Should I sell it or have a spare trike?

[code200k]

looked at the pic of the tri z im hoping to get..

[zppeacock]

Sold my Yamaha. :(

[QCR77]

checked the oil, picked up the plug i ordered and put it in. it didnt like the autolite so i'll put the ngk back in. gotta go to the coast for work tomorrow. sometime this week i'll get to ride my atcs in the sand for the first time

[trikerooster]

Walked into garage and stared at the paddles and dreamed that I had nobbies
to ride on the street. I then started it and stuck my face in front of the exaust and fantasized about all the full throttle wheelies up sand hills. Then I thought maybe I can do a superman seat grab next time I jump! I love your soft, smooth, and shiny metal.

[Thorpe]

Installed new shoes on both ends of the BR, jacked up the rear shock, got it all ready for deer hunting...

[code200k]

spent a half hour cleaning what im preety sure is over 20 years of gunk from my front rim..just the rim...

[Jbird5363]

i went mudding at spring creek and was the only bike in our crew that didnt get towed back funny thing is they were all giving me crap for breaking down all the time they have new bikes like monthes old

[eyecekold1]

Gathered all my tecates together so I can decide on the parts to complete 3 of the 8 that I have. And I took pics of my stuff so I can have other 3 wheeler nuts tell me what I have. And then i put everything away.

[daniel_250r]

looked at it for five minutes then rode my new pitster pro 125 ohhh man lots of power

[inv3ctiv3]

I started them both and did a couple of wheelies in the driveway haha

[zppeacock]

Went mudding with all the toys in my sig, it was very FUN!!

[PepeLep]

I hauled a big, fat doe out of the woods with mine.
:beer