PDA

View Full Version : My 1985 1/2 Tri-Z



Mfred_2000
10-11-2008, 12:11 AM
http://i46.photobucket.com/albums/f114/mfred_2000/100_1467.jpgB]So I finally got my Tri-Z done, well almost. I have spent alot of time replacing the rear carrier bearings, and the front hub bearings. Now I think the swingarm needle bearings need replaced, but this may be a job as the pivot bolt is frozen in place. It runs great, but no matter what I do, it still runs rich. I am mixing 32:1, adjusted the carb ect....but still seems like alot of smoke...Best part is, I picked this up on craigslist as a non-runner. for 525.00 with a new set of rear tires that I sold for 60.00. As it sits now I have an additional 200.00 in it, plus my time powdercoating. It is stock except for the banshee hubs and 10" Wheels. Oh yea and the answer silencer off a YZ. Its not perfect, but a great rider...its wicked fast. So what do you think? I recusitated a legend.[/B]

Mfred_2000
10-11-2008, 12:12 AM
http://i46.photobucket.com/albums/f114/mfred_2000/100_1463.jpg

LonesomeTriZ
10-11-2008, 12:43 AM
Damn nice.

oldtime3wheeler
10-11-2008, 08:12 AM
Love the look of tri-z's

Mfred_2000
10-11-2008, 10:06 AM
Thanks I like the size of the Tri-Z. It just feels right at high speed...

http://i46.photobucket.com/albums/f114/mfred_2000/100_1468.jpg

edog
10-11-2008, 10:09 AM
Nice Z!!

Keep your eye on the water pump.

Mosh
10-11-2008, 10:53 AM
Nice machine.

I really need to get started on my new trail Z build.
Even though I ride the R now,I still think the Z is the best looking trike on the planet.....

edog
10-11-2008, 11:00 AM
Nice machine.

I really need to get started on my new trail Z build.
Even though I ride the R now,I still think the Z is the best looking trike on the planet.....

Your delusional from all the 2 stroke smoke.:lol:

Blown 331
10-11-2008, 11:07 AM
Very nice indeed. Around spring time I think I'm going to keep an eye out for one. That will be a nice addition to my collection. I actually know of a good deal for a pretty nice one right now but I am letting a freind buy it. I just bought 84 ATC70, 83 ATC70, 84 ATC250R, 85 Tecate and 84 TT600 within the last month or 2 so I need to chill. lol.
I had a TRI-Z with a YZ465 motor but it was slow, pretty much sucked. Sometimes I think I should have kept it and turned it back to stock. Oh well, I'll get another.

njeffery
10-11-2008, 04:49 PM
edog, what happens to the water pumps? I just want to know cause I have mine torn down so now would be a good time to replace anything.

edog
10-11-2008, 05:11 PM
http://www.3wheelerworldforums.com/showthread.php?t=54523&highlight=Tri-z+water+pump

z400guy28
10-11-2008, 06:24 PM
That is a nice Tri-Z, makes me wish i still had mine. Mine was an 85 also but yellow and black. Hopefully this spring i will be able to find a Tri-z for around a grand or less like i payed for my old Tri-z. And i agree it is the best looking trike.

ceaserthethird
10-12-2008, 06:02 AM
what year is the Answer silencer for ?

factoryX
10-12-2008, 06:17 AM
dg head pipe..

Blown 331
10-13-2008, 08:50 AM
Very nice indeed. Around spring time I think I'm going to keep an eye out for one. That will be a nice addition to my collection. I actually know of a good deal for a pretty nice one right now but I am letting a freind buy it. I just bought 84 ATC70, 83 ATC70, 84 ATC250R, 85 Tecate and 84 TT600 within the last month or 2 so I need to chill. lol.
I had a TRI-Z with a YZ465 motor but it was slow, pretty much sucked. Sometimes I think I should have kept it and turned it back to stock. Oh well, I'll get another.

I guess spring came early because I bought a TRI-Z yesterday. lol.

ATC-Eric
10-14-2008, 12:36 PM
Good lookin Z you got there.

One thing I swear by is an inline temp guage. It will tell you if youve got problems before your cylinder locks up. AND it will tell you if your running a little to on the lean side.

I love my $60 temp guage, a very nice insurance policy. I would have toasted probably more then one cylinder without it. Didnt know it was running that lean until I looked down and saw 250 :eek: !!!!!!

Blown 331
10-14-2008, 12:41 PM
Good lookin Z you got there.

One thing I swear by is an inline temp guage. It will tell you if youve got problems before your cylinder locks up. AND it will tell you if your running a little to on the lean side.

I love my $60 temp guage, a very nice insurance policy. I would have toasted probably more then one cylinder without it. Didnt know it was running that lean until I looked down and saw 250 :eek: !!!!!!

Got a link to the gauge? I wouldn't mind having one just for tuning between the 3 bikes.

ATC-Eric
10-14-2008, 12:59 PM
Heck, a little more pricey then I remember. Heres one for $75 to your door.

http://cgi.ebay.com/ebaymotors/ESR-Water-Temperature-Gauge-TRX250R-TRX450R-250R-450R_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q3a 1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2 ec0Q2em14QQhashZitem350107850059QQitemZ35010785005 9

Upfront cost may be a bit much, but its a lot better then redoin a top end.

Just-Tri-It
10-14-2008, 10:17 PM
Do you think the gauge would go on a Tri-z?
How would I mount it so I could see it easily?:wondering
Thanks
sheeptender